In this paper, a non-isothermal flow of a micropolar fluid in a thin pipe with circular cross-section is considered. The fluid in the pipe is cooled by the exterior medium and the heat exchange on the lateral part of the boundary is described by Newton’s cooling condition. Assuming that the hydrodynamic part of the system is provided, we seek for the micropolar effects on the heat flow using th...

The swirling transport characteristics of grain particles in bulk pipeline after fluidization were studied. A spinning device was designed for the lateral filling pipe. pipe distributed uniformly along circumference same section main pipe, number set to 3–7, and included angles with 20°, 30°, 40°, respectively. CFD-DEM used simulate swirl a horizontal pipeline. multiphase inlet velocity 20 m/s,...

This study presents a design method to fabricate a novel hybrid-structure flat plate heat pipe (NHSP heat pipe) for a concentrator photovoltaic. The NHSP heat pipe is composed of a flattened copper pipe and a sintered wick structure, and a coronary-stent-like rhombic copper mesh supports the structure. The coronary-stent-like supporting structure enhances the mechanical strength and shortens th...

if an air flow is injected into a liquid fluid, many ambulant air bubbles are formed inside the fluid. air bubbles move inside the liquid fluid because of the buoyancy force, and the mobility of these air bubbles makes sizable commixture and turbulence inside the fluid. this mechanism was employed to enhance the heat transfer rate of a horizontal double pipe heat exchanger in this paper. howeve...

The flow velocity distribution in partially-filled circular pipe was investigated in this paper. The velocity profile is different from full-filled pipe flow, since the flow is driven by gravity, not by pressure. The research findings show that the position of maximum flow is below the water surface, and varies with the water depth. In the region of near tube wall, the fluid velocity is mainly ...

Due to the periodic movement of the piston in the reciprocating pump, the fluid will cause 8 pressure pulsation, and the vibration of the pipeline will lead to instrument distortion, pipe failure 9 and equipment damage. Therefore, it is necessary to study the vibration phenomena of the 10 reciprocating pump pipeline based on the pressure pulsation theory. This paper starts from the 11 reciproca...

High-concentration viscous paste has a large conveying resistance during transport in high-pressure long-distance pipelines. When the pump reverses, pipeline flows back, which not only causes violent vibration of system, but also reduces efficiency. To study transient flow characteristics and backflow reverse process, we established quasi-two-dimensional model for transportation straight pipe b...

In the present research, the laminar forced convective heat transfer and fluid flow characteristics for Al2O3-water nanofluid flowing in different bend (i.e., 180o and 90o) pipes have been investigated numerically in a three-dimensional computational domain using the finite volume technique. The effects of different pertinent parameters, such as the Reynolds number of the duct, volume fraction ...

Fluid-structure interaction (FSI) occurs when the dynamic water hammer forces; cause vibrations in the pipe wall. FSI in pipe systems due to Poisson and junction coupling has been the center of attention in recent years. It causes fluctuations in pressure heads and vibrations in the pipe wall. The governing equations of this phenomenon include a system of first order hyperbolic partial differen...