An acoustic method is proposed for measuring the flow resistivity and the thickness of air-saturated porous materials. The conventional methods [14, 16, 17] for the measurement of the flow resistivity (or the viscous permeability) require the prior knowledge of the porosity. The method presented in this work is based on a temporal model of the direct problem in which a simplified expression (in...

A chemically bonded phosphate ceramic material has been prepared for the sake of encapsulating lead battery waste. In this paper the optimum conditions for the preparation of magnesium potassium phosphate compacts are determined and the formation of the final product assessed using XRD. The effect of applied pressure and pressing duration as well as the Mg:K molar ratio on the porosity and perm...

The capacity of fluvial brine-bearing formations to sequester CO2 is investigated using numerical simulations of CO2 injection and storage. Capacity is defined as the volume fraction of the subsurface available for CO2 storage and is conceptualized as a product of factors that account for two-phase flow and transport processes, formation geometry, formation heterogeneity, and formation porosity...

We have combined a turbulent jet flow ozone contactor (TJC) with a membrane bioreactor (MBR) to establish a zero-discharge system in terms of excess sludge in the MBR. The TJC-MBR system was compared with the conventional MBR (Control-MBR) with respect to i) the size and zeta potential of the sludge particles, ii) the loosely bound extra-cellular polymeric substances (EPSs) and tightly bound EP...

We study through numerical simulations the dependence of the hydraulic permeability of granular materials on the particle shape and the grain size distribution. Several models of sand are constructed by simulating the settling under gravity of the grains; the friction coefficient is varied to construct packs of different porosity. The size distribution and shapes of the grains mimic real sands....

To study the coupled thermo-hydrologic-geomechanical processes and their influence on gas and nuclide transport in a two phase flow through the porous medium, a coupling of the thermo-hydrodynamic code TOUGH2 and the thermo-mechanic code FLAC3D is described and applied to analyze three dimensional gas, heat and nuclide transport in a repository for disposal of heat generating nuclear waste in a...

A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical paramete...

In the region of minimum porosity of particulate binary mixtures, heat exchange and permeability were found to be higher than the ones obtained with a mono-size packing built with the same small size particles used in the binary packing. This effect was noticed in the range of the particles size ratio 0.1–1.0. The obtained improvement on thermal performance is related to the increase of effecti...

Poly(1,8-octanediol-co-citric acid) (POC) is a synthetic biodegradable elastomer that can be processed into three-dimensional (3D) scaffolds for tissue engineering. We investigated the effect of designed porosity on the mechanical properties, permeability, and degradation profiles of the POC scaffolds. For mechanical properties, scaffold compressive data were fitted to a one-dimensional (1D) no...

A selection of these reports is available in PostScript form at the Faculty's anonymous ftp-Abstract We consider the one-dimensional two-phase ow through a heterogeneous porous medium. The heterogeneity is due to the spatial variation of the absolute permeability and the porosity. Both these quantities are assumed to be piecewise constant. At interfaces where the rock properties are discontinuo...