The aim of the present investigation was to characterize the baroreflex in weaned 23- to 25-day-old rats when maternal influences were no longer present. The relationship between mean arterial pressure (MAP) and heart rate (HR) was determined during baroreceptor loading with phenylephrine and baroreceptor unloading with sodium nitroprusside in conscious rats, first in the freely moving state an...

By taking the axial tension member as an example, the damage caused by the cyclic stress influencing reliability was researched. According to the damage mechanics theory, some micro-cracks were observed in the material with cyclic load. With the increase of times loads inflicting, the fresh micro-cracks were formed; meanwhile, the existing cracks further extended, consequently, the effective be...

This paper presents an experimental study on the local and global mechanical behaviours of textile-reinforced cementitious matrix composites (TRCs) subjected to cyclic loading. Two configurations are tested: TRCs with one two layers. These were tested under three different loading modes: monotonic until failure, in pre-cracking stage, crack propagation stage 3000 cycles. The was followed by a r...

loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. one of the most important durability problems in diesel engines is due to the cracks valves bridge area. the purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. in this article, mechanical prope...

BACKGROUND The computation of arterial wall deformation and stresses under physiologic conditions requires a coupled compliant arterial wall-blood flow interaction model. The in-vivo arterial wall motion is constrained by tethering from the surrounding tissues. This tethering, together with the average in-vivo pressure, results in wall pre-stress. For an accurate simulation of the physiologic c...

An analytical solution is presented for the thermoelastic problem of a half-plane with several cracks under thermo mechanical loading using distributed dislocation technique. The uncoupled quasi-static linear thermoelasticity theory is adopted in which the change in temperature, if any, due to deformations is neglected. The stress field in a half-plane containing thermoelastic dislocation is ob...

Due to high surface-to-volume ratio of nanoscale structures, surface stress effects have a significant influence on their behavior. In this paper, a two-dimensional problem for an elastic layer that is bonded to a rigid substrate and subjected to an inclined concentrated line load acting on the surface of the layer is investigated based on Gurtin-Murdoch continuum model to consider surface stre...

PURPOSE To evaluate the influence of different implant numbers and connection types on the biomechanical behavior of mandibular full-arch implant-supported rehabilitation. MATERIALS AND METHODS Computed tomography-based finite element models comprising a totally edentulous mandible and 3.8 × 13-mmdiameter implants, abutments, abutment screws, bar retaining screw, and bar were constructed. Dif...

The time dependency of stress distribution in the supporting structures under dentures was simulated, under three loading conditions, by visco-elastic finite element stress analysis. In this simulation, viscoelastic material, was used as a model for soft tissue. The results indicate that the viscous flow of soft tissue and the loading position are factors determining stress intensity in the sup...

Distributions of growth strains in branches, straight trunks and basal sweeping trunks of Chamaecyparis formosensis Matsum. trees were measured with strain gauges. Microfibril angles (MFAs) of the S2 layer of the cell wall were measured by the iodine deposition method and their relationships with growth strain examined. The magnitude of the compressive stress on the lower side of trunks with a ...