Glycerol hydrodeoxygenation to 1,2-propanediol (1,2-PDO) is a reaction of high interest. However, the need for hydrogen supply is a main drawback of the process. According to the concept investigated here, 1,2-propanediol is efficiently formed using bio-glycerol feedstock with H2 formed in situ via ethanol aqueous phase reforming. Ethanol is thought to be a promising H2 source, as it is alcohol...

A supported Pd-Au (Au 7wt%) membrane was produced by electroless plating deposition. Permeation tests were performed with pure gas (H₂, H₂, N₂, CO₂, CH₄) for long time operation. After around 400 h under testing, the composite Pd-Au membrane achieved steady state condition, with an H₂/N₂ ideal selectivity of around 500 at 420 °C and 50 kPa as transmembrane pressure, remaining stable up to 1100 ...

Solid oxide fuel cells (SOFCs) can be operated in a reversed mode as electrolyzer cells for electrolysis of H2O and CO2. In this paper, a 2D thermal model is developed to study the heat/mass transfer and chemical/electrochemical reactions in a solid oxide electrolyzer cell (SOEC) for H2O/CO2 co-electrolysis. The model is based on 3 sub-models: a computational fluid dynamics (CFD) model describi...

The partial oxidation and CO2 reforming of methane were studied on Pt/Al2O3, Pt/ZrO2, and Pt/ Ce–ZrO2 catalysts. The reducibility and the oxygen transfer capacity were evaluated by oxygen storage capacity (OSC). The effect of the support on the cleaning mechanism of the catalyst surface was investigated by the sequence of CH4/O2 and CH4/CO2 pulses. The Pt/Ce–ZrO2 catalyst showed the highest sta...

Molten carbonate fuel cells (MCFCs) use molten as an electrolyte. MCFCs operate at high temperatures and have the advantage of using methane a because they can nickel-based catalysts. We analyzed performance internal manifold-type MCFC, according to operating conditions, computational fluid dynamics. Different conditions were used for external reforming-type MCFCs. Flow directions, gas utilizat...

Aqueous phase reforming (APR) of biomass derived feedstock producing hydrogen was reviewed. The APR process was discussed based on different feedstock categories such as sugars, polyols and ethanol. The mechanism of APR was analyzed referring to different structures of feedstock. The reaction pathways of APR were investigated. The usage of catalysts should be judged by feedstock on the requirem...

Aqueous-phase reforming (APR) of the low-boiling fraction (LBF) of bio-oil from rice husk pyrolysis was investigated over Pt/Al(2)O(3) for hydrogen production. The influence of reaction temperature (503-563 K), reaction time (1-4h), different load of organics in water (3-12 wt.%) and catalyst amounts (0.25-1g) were studied. The hydrogen content of the gas products reached 65 vol.% at 533 K for ...

Exploiting the greenhouse gas CO2 as raw material could be more advantageous than its long-term storage. For instance, CO2 can be used on large scale for the production of COrich syngas with a H2/CO ratio of unity. Such a syngas can be used for the synthesis of commodity chemicals like aldehydes and ketones obtained through carbonylation of alkenes in hydroformulation and can be produced by CO2...

A series of Ni/SBA-15/Al(2)O(3)/FeCrAl metal monolithic catalysts with Ni loadings varying between 3 % and 16 % were prepared, and their structure was characterized by various techniques. The catalytic activity of the catalyst for methane reforming with CO(2) leading to synthesis gas was evaluated using a fixed-bed reactor. The results indicate good catalytic activity of the Ni/SBA-15/Al(2)O(3)...