Research reported in this paper was carried to study the water permeability of steel fibre reinforced concrete (SFRC) with varied aspect ratios of steel fibres. Corrugated steel fibres were used in the investigation at constant fibre content of 0.5%. Relationship of water permeability with compressive strength and split tensile strengths has been presented. The water permeability was observed t...

Performance based design (PBD) is an iterative exercise in which a preliminary trial design of the building structure is selected and if the selected trial design of the building structure does not conform to the desired performance objective, the trial design is revised. In this context, development of a fundamental approach for performance based seismic design of masonry infilled frames with ...

This study investigates the effect of different link beam lengths in the Reinforced Concrete (RC) frame retrofitted with the Linked Column Frame (LCF) system. It also investigates the ratio of the link beam length (e) to the span length of the RC frame (L) from 0 to 1.5 for the 9 models of the RC frame retrofitted by the LCF system has been investigated. In addition, it studies the formation of...

This work focuses on assessing costs and effectiveness of climate adaptation strategies for existing reinforced concrete structures subject to chloride penetration and climate change. We will study on existing reinforced concrete structures built in France at different years under different building codes. Concerning environmental actions, we considered historical meteorological data and two cl...

A non-destructive measuring technique to determine the fiber content in hardened steel fiber reinforced concrete is presented. The technique is based on an accurate open-ended coaxial probe reflectometry method for measuring the effective permittivity of the fiber reinforced concrete and on a mixing rule from the classical homogenization theory for deriving the fiber content from the measured p...

In this paper, optimum design of three-dimensional (3D) multi-story reinforced concrete (RC) structures is obtained using an improved version the plasma generation optimization (IPGO) algorithm. The reinforcing bars and geometry cross-sections are considered as discrete variables that chosen from a prearranged section database. objective function cost framework, steel concrete. moment shear fra...

In the present study, the reliability assessment of performance-based optimally seismic designed reinforced concrete (RC) and steel moment frames is investigated. In order to achieve this task, an efficient methodology is proposed by integrating Monte Carlo simulation (MCS) and neural networks (NN). Two NN models including radial basis function (RBF) and back propagation (BP) models are examine...

The use of fiber reinforced polymer (FRP) bars in reinforced concrete members enhances corrosion resistance when compared to traditional steel reinforcing bars. Although there is ample research available on the behavior of FRP bars and concrete members reinforced with FRP bars under elevated temperatures (due to fire), there is little published information available on their post-fire residual ...

There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...