A series of ring shear tests were conducted to investigate the ultimate particle size distribution a carbonate sand. The carried out under different stress levels, on three types specimens: 1) uniformly graded specimens made dry natural sand 2) remoulded crushed after first shearing large strains 3) grains but with same grading as in (2). type (1), very strains, led apparently stable gradings, ...

The present work is focused on the study of fluidization behaviour of biomass and sand mixtures in a laboratory scale test set up. The biomass materials used during the experimentation were rice husk, bagasse and sawdust. Two different particle sizes of silica sands were used in forming the mixture. The percentages of biomass in the mixtures were 2%, 5%, 10% and 15% by weight. The minimum fluid...

Triboelectric charging occurs in granular insulating systems even when all particles are composed of identical material. A simple model is used here to address triboelectric charging in such systems. The basis of the model is the existence of electrons trapped in high-energy states, which can be released during collisions with another particle and transferred to the other particle. This model s...

The oil sands mining and extraction processes in Canada produce large volumes of tailings that are a mixture of mainly water, clay, sand, chemicals and bitumen. This residue is deposited into tailings ponds where sand settles faster than fine clays which require many years to fully consolidate. Therefore, land reclamation and water recirculation become significant environmental impacts. The tai...

The energy spectrum of the Neutron Radiation Effects Program (NREP) beam line, Target-ModeratorReflector-1 (TMR-1), at Indiana University has not been previously characterized. The facility has a unique proton source with variable pulse length (15-600 s) and energy (13 MeV). Thus, it can produce a unique and tailored neutron beam when incident on a beryllium target. Through a combination of MCN...

The viability of base-treated juniper fiber (BTJF) media for removing toxic heavy metals (Cd2+, Cu2+, Pb2+, Zn+) in stormwater runoff was investigated. The sorption ability ofthe BTJF for all metals was much higher than that of untreated juniper. The affinity sequence of both materials, BTJF and untreated juniper, was Pb > Cu > Zn:,. Cd. This order is explained by the hydrolysis constants for e...

This paper clearly explains the use of drift flux models based on Eulerian continuum equations in predicting erosion wear rate in a transmission pipeline. In this case, a pipeline with a diameter of 0.5m was investigated. It was found that there was a large sand particle concentration on the welded parts of the pipe which has affected the internal geometry of the pipe. From physical examination...

Model tests were carried out in dry silica sand under pile loading and visualizing observation to investigate the behavior of a pile group. The pile group consisted of nine cylindrical model piles of 40 mm in diameter in most tests or three rectangular parallelepiped model piles in the visualizing observation. Pile spacings of 200 mm and 100 mm between pile centers were used in the models. Tact...