A common understanding of plastic deformation of metallic glasses (MGs) at room temperature is that such deformation occurs via the formation of runaway shear bands that usually lead to catastrophic failure of MGs. Here we demonstrate that inhomogeneous plastic flow at nanoscale can evolve in a well-controlled manner without further developing of shear bands. It is suggested that the sample und...

A dual phase Ti-6A1-4V alloy was tested in uniaxial tension over a large quasi-static loading range (10−5–10−1 s−1) in ambient environment. As strain rate increases, strength of the alloy was found to increase at the expense of ductility. In the low strain-rate region, strain rate sensitivity of the material experienced a gradual decrease during plastic deformation. In the high strain-rate regi...

The process of nanocontact including indentation and retraction between a large Ni tip and a Cu substrate is investigated using quasicontinuum (QC) method. The multiscale model reveals that significant plastic deformation occurs during the process of nanocontact between Ni tip and Cu substrate. Plastic deformation is observed in an area as large as 20 nm wide and 10 nm thick beneath Ni tip duri...

This paper provides an introduction in the field of severe plastic deformation (SPD). First of all the main methods to produce SPD materials are discussed. In the following section, the mechanisms leading to the formation of fine grains are reviewed and the influence of changes in strain path is highlighted. During post-SPD thermal annealing, some typical microstructural changes take place. The...

A lattice Boltzmann method for axisymmetric multiphase flows is presented and validated. The method is capable of accurately modeling flows with variable density. We develop the classic Shan-Chen multiphase model [Phys. Rev. E 47, 1815 (1993)] for axisymmetric flows. The model can be used to efficiently simulate single and multiphase flows. The convergence to the axisymmetric Navier-Stokes equa...

STATEMENT OF PROBLEM Impressions are made using high-viscosity putty vinyl polysiloxane impression materials in conjunction with disposable plastic stock trays. The impression materials have been shown to be dimensionally stable. However, it remains unclear if the disposable plastic stock trays are rigid enough to resist deformation thus yielding potentially unreliable results. PURPOSE This s...

The localization of plastic deformation into a shear band is discussed as an instability of -plastic flow and a precursor to rupture. Experimental observations are reviewed, a ge~eral theoretical framework is presented, and specific calculations of critical conditions are carried out for a variety of material models. The interplay between features of inelastic constitutive description~ especial...

Abstract The present topography of Tian Shan is related to the India-Asia collision, whereas mechanisms for topographic growth remain at center debate partly due poorly constrained onset timing Cenozoic tectonic deformation. Our new apatite (U-Th)/He (AHe) data in northern Chinese suggest that rapid cooling commenced 20.2±4.9 Ma along margin, which consistent with published fission-track from s...

Original scientific paper In this paper, based on the overlapping deformation mode of load transfer law of uplift belled pile, and the theory of elastic mechanics, the elastic-plastic analytical solutions of uplift belled pile were derived, and the nonlinear elastic-plastic deformation analysis method was established, which made the deformation analysis theory of uplift belled pile more reasona...