Abstract The application of a specific rheological polishing slurry is proposed first for high-efficiency machining steel materials to achieve high-quality ultraprecision finished surfaces. rheology the was explored show that non-Newtonian medium with certain parameters content components exhibits shear-thickening behavior. Then new nano approach applied process spherical surfaces bearing steel...

The fact that water is the most important material used by mankind defines the importance of water purification. Wastewater and industrial effluent treatment require removal of suspended solids for purification and possible re-usage. The removal can be accomplished by gravitation (very slow), by coagulation (dependent on electric charge situation) and by flocculation (not dependent on electric ...

Abstract A comparative study of de-icing evaluation methods was conducted in this work, and their variations response to surface characteristics were investigated. The mechanical measurements include centrifugal, push, tensile methods. centrifugal the horizontal push (shear) suggested a linear relationship ice adhesion strength with roughness, whereas (normal) method indicated an inverse curvil...

A novel method of the hot consolidation metal powders with shear deformation is proposed. The were encapsulated into tight containers and compacted after short-term heating in a furnace preheated to 900 °C. prevents powder oxidation, peripheral spalling ensures removal oxide films from surfaces. Commercial titanium different dispersivities impurity concentrations hot-compacted. microstructure, ...

up to now, lots of materials such as active carbon, iron, manganese, zirconium, and metal oxides have been widely used for removal of dyes from contaminated water. among these, ferrite nanoparticle is an interesting magnetic material due to its moderate saturation magnetization, excellent chemical stability and mechanical hardness. graphene, a new class of 2d carbonaceous material with atom thi...

water resource scarcity, population growth, pollution of surface and groundwater by discharging toxic wastewater and subsequent diseases may raise the necessity of reusing and treatment of wastewater. cyanide is one of the toxic materials which can be found in some industrial wastewaters. strict laws set by international bodies have forced industries to work on developing efficient cyanide remo...

The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

In this paper, shear localization due to strain softening in sidepressed cylinders, is inverstigated. Shear localization causes formation of macroscopic shear bands which can be obsserved in the metallographic cross-section. In this paper, for the first time a method is presented in which a simple two-slice model is used to study the formation of shear bands. The results obtained form this mode...

Consideration of sludge rheology is very important for a proper solids transport and to obtain the necessary settler capacity. Although a true yield stress does not exist, large apparent viscosities at low shear rates inhibit an efficient sludge transport. Research indicates that the dimensionless ratio of gravity to viscous forces is an important operational parameter towards settler capacity....

This study makes use of the Tsallis entropy to predict the shear stress distribution. Given a definition of the Tsallis entropy, it is maximized by using the probability density function, which then is used to attain a novel shear stress equation. This is then employed for calculating the shear stress distribution in rectangular channels in different aspect ratios and finally, for viability, th...