Background: Recently, rapid prototyping technology is the future of quick and direct production. This technology found applications with metal framework of fixed partial dentures, framework of removable partial dentures, facial prostheses and titanium implants in prosthetic dentistry. Laser beam sintered the selected areas on the alloy powders and the restoration is produced layer by layer at s...

The sintering of metal powders is an efficient and versatile technique to fabricate porous metal elements such as filters, diffusers, and membranes. Neck formation between particles is, however, critical to tune the porosity and optimize mass transfer in order to minimize the densification process. In this work, macro-porous stainless steel (SS) hollow-fibers (HFs) were fabricated by the extrus...

The aim of this study was to compare the shear bond strengths (SBS) of cast, machined, and laser-sintered titanium to dental porcelain. Two kinds of dental porcelains (Titankeramik and Triceram) were applied on cast (Tritan), machined (DC-Titan), and laser-sintered (EOSINT) titanium specimens (n=10). SBS test was conducted, and fracture surface analysis was also performed to determine the failu...

Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) mil...

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

Lithium aluminosilicate powder precursors of compositions Li2O:Al2O3:SiO2 as 1:1:2; and 1:1:3.11 were synthesized and sintered by the Spark Plasma Sintering technique. The sintering conditions were adjusted to obtain dense ceramic materials in an attempt to avoid the presence of a glassy phase. XRD and SEM images were employed for composition and microstructure characterization. The coefficient...

Biocompatibility of a new bioactive glass composition for medical applications was evaluated with the addition of fluorides, such as CaF2 and MgF2, for the substitution of Na2O in the conventional bioactive glass composition (SiO2-CaO-Na2O-P2O5). Also, the physical properties of these glass ceramics were investigated. When B2O3 was added as a Na2O substitution, the thermal expansion coefficient...