in this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from isfahan steel mill for cement. the control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. the slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

this study was conducted in order to evaluate the effects of long term ageing on toughness andresilient modulus of asphalt concrete mixtures containing electric arc and basic oxygen furnacesteel slags. after initial evaluation of the properties of steel slags using x-ray diffraction andscanning electric microscope, eleven sets of laboratory mixtures were prepared. each set wastreated replacing ...

the steel slag is the main by-product of steel industry. the aim of this study using the steel slag as a low-cost absorbent in order to remove cadmium pollutant from industrial wastewater. some factors that affect the process of cadmium removal by steel slag such as ph, contact time, absorbent dosage and cadmium initial concentration has been studied. standard solution of synthetic wastewater i...

Steel slags are the by products of steel industries, which forms during reduction process of iron melting. The chemical composition of it changes depending to the melting procedure. Its mineralogical composition also varies based on the cooling procedure. Two different types of steel slag were used as absorbing bed for various concentrations of Pb2+ ions in the form of lead chlor...

in this study, vanadium recovery from the steelmaking converter slag was studied. salt roasting-basic leaching is the process which was applied to separate and extract vanadium from steel making slag. ground slag was roasted after mixing with determined quantities of sodium carbonate. the effect of time and temperature of roasting and sodium carbonate content were studied. the optimum temperatu...

TiN and Ti2O3 are the predominant inclusion types in Ti-alloyed ferritic chromium stainless steels. In order to ensure the required steel cleanness level, an effective removal of such inclusions in the slag during secondary metallurgy is essential. This inclusion removal predominantly takes place via dissolution of the inclusion in the slag. The dissolution behavior of TiN and Ti2O3 in CaO-SiO2...

Aluminium salt slag (also known as aluminium salt cake), which is produced by the secondary aluminium industry, is formed during aluminium scrap/dross melting and contains 15-30% aluminium oxide, 30-55% sodium chloride, 15-30% potassium chloride, 5-7% metallic aluminium and impurities (carbides, nitrides, sulphides and phosphides). Depending on the raw mix the amount of salt slag produced per t...

Adsorption characteristics of potentially toxic metals in single- and multi-metal forms onto ferronickel slag were evaluated. Competitive sorption of metals by ferronickel slag has never been reported previously. The maximum adsorption capacities of toxic metals on ferronickel were in the order of Cd (10.2 mg g(-1)) > Cu (8.4 mg g(-1)) > Zn (4.4 mg g(-1)) in the single-metal adsorption isotherm...

At present, one of the most suitable ways to get a more sustainable cement industry is to reduce the CO₂ emissions generated during cement production. In order to reach that goal, the use of ground granulated blast-furnace slag as clinker replacement is becoming increasingly popular. Although the effects of this addition in the properties of cementitious materials are influenced by their harden...