Palladium nanoparticles were supported on a fluorous organic-inorganic hybrid material prepared by the sol-gel process without TEOS. Recycling studies on the Heck coupling reaction have shown that the catalyst can be readily recovered and reused.

Terbium doped Y2O3 planar waveguides were fabricated by sol–gel process and dip-coating using yttrium acetate as precursor. Two different doping modes were compared, i.e. introduction in the sol of dispersed Tb3+ions from dissolved Tb(NO3)3, or of nanoparticles of Tb2O3 or [Y2O3:50% Tb] from an alcoholic suspension. The chemical and nanostructural properties were analyzed by infrared spectrosco...

Nanostructured ZnO thin films were prepared by sol-gel dip coating technique. Zinc acetate and ammonium hydroxide were used as precursors and ethanol was as solvent. Ammonium hydroxide (NH4OH) solution was added drop-wise under vigorous stirring to obtain the sol-gel of different pH (varying from 6.9 to 7.2). ZnO thin films were obtained by dipping the glass substrates for few seconds and then ...

Hydroxyapatite (HAP) ceramics belongs to a class of calcium phosphate-based biomaterial, which has been widely used as bone substitute for long time. In recent years, synthetic HAP has assumed substantial interest and importance due to its chemical similarity with the natural Ca phosphate mineral present in a biological hard tissue. Considering the wide applications of calcium phosphate compoun...

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol exhibited self pr...

This paper reports a method to integrate silica aerogels monolithically in microfluidic chips. Silica Aerogel is a highly porous bulk material. The gel was synthesized from tetraethyl orthosilicate by a sol-gel process. Polyethylene glycol and an extended aging period were used to strengthen the matrix minimizing gel shrinkage. This technique allows alcogel structures with high strength and sti...

Selecting a proper support in the catalyst system plays an important role in hydrogen production via ethanol steam reforming. In this study, sol gel made alumina supports prepared for nickel (Ni) catalysts were calcined at different temperatures. A series of (Ni/AlS.G.) catalysts were synthesized by an impregnation procedure. The influence of varying the calcination temperature of the sol gel m...

In this article experimental data are presented for inorganic gel based smart window fabricated using silica sol-gel process. Parallel beam transmittances were measured as functions of voltages for samples fabricated with different concentrations of nitric acid. Spectroscopic transmittance data at different driving voltages for samples fabricated with different LC concentrations are shown. Tran...

A new sol±gel route was applied to prepare alumina ®lms by using AlCl3 ́6H2O as starting material and acetylacetone (AcAc) as additive. Our research results show that AcAc and aluminum form a complex compound in the sol, which makes the sol very stable. Meanwhile, the complex structure prevents the decomposition going on quickly during the sintering process and the obtained ®lms are free of crac...