We examine the dependence of the deformation obtained by bending quasi-Fuchsian structures on the bending lamination. We show that when we consider bending quasi-Fuchsian structures on a closed surface, the conditions obtained by Epstein and Marden to relate weak convergence of arbitrary laminations to the convergence of bending cocycles are not necessary. Bending may not be continuous on the s...

An analytic formula is derived for the elastic bending modulus of monolayer graphene based on an empirical potential for solid-state carbon atoms. Two physical origins are identified for the non-vanishing bending stiffness of the atomically thin graphene sheet, one due to the bond-angle effect and the other resulting from the bond-order term associated with the dihedral angles. The analytical p...

Tailor-made blanks are sheet metal assemblies with different thicknesses and/or materials and/or surface coatings. A monolithic sheet can be machined to make the required thickness variations that is referred as tailor machined blanks. Due to the thickness variation in tailor machined blanks, laser bending of these blanks is more complicated than monolithic plates. In this article, laser formin...

Herein paper compares the analytical model with the FEM based numerical model of the axisymmetric bending of circular sandwich plates. Also, the paper describes equations of the circular symmetrical sandwich plates bending with isotropic face sheets and the nonlinear elastic core material. The method of constructing an analytical solution of nonlinear differential equations has been described. ...

The leakage characteristics of the bending-teeth gland, which may be helpful for the fast start and fast stop of the steam turbine, was discussed in this paper by using ANSYS6.1 software. By compared the flow fields in straight-teeth gland and bending-teeth gland, the methods for the bending-teeth gland to decrease the steam leakage was proposed. The results show that, although the leakage of t...

OBJECTIVE To evaluate the mechanical properties of the Polyaxial Advanced Locking System (PAX) in screw push-out and four-point bending. MATERIALS AND METHODS Screw push-out: PAX locking screws were applied to first generation PAX plates at three different insertion angles with two different insertion torques. A load was applied parallel to the screw axis, and screw push-out force was measure...

COMPARISON BETWEEN THREE-POINT AND FOUR-POINT FLEXURAL TESTS 2 TO DETERMINE WOOD STRENGTH OF EUCALYPTUS SPECIMENS 3 Paulo Ricardo Gherardi HEIN*, Loïc BRANCHERIAU 4 *Corresponding author: [email protected] 5 Received: September 21, 2016 6 Accepted: January 24, 2018 7 Posted online: January 25, 2018 8 9 ABSTRACT 10 11 Comparison between flexural wood strength values obtained from three-poin...

The conventional French fatigue test has yielded significantly different results for two asphalt materials with the same grade of pure asphalt. A research program was begun to study the influence of the asphalt nature on the fatigue behavior of asphalt materials. The program included full-scale experimentation on the circular test track of the Laboratoire Central des Ponts et Chaussees, laborat...

In this work, the bending fracture process of a stress biased piezoelectric composite actuator (PCA) under a three-point bending load have been characterized with the aid of acoustic emission (AE) monitoring. The AE signal from the monolithic PZT wafer at the maximum bending load shows the characteristics of high amplitude and long duration with a low dominant frequency band confirmed by a fast...

Achieving vibration and/or wave attenuation with locally resonant metamaterials has attracted a great deal of attention due to their frequency dependent negative effective mass density. Moreover, adaptive phononic crystals with shunted piezoelectric patches have also demonstrated a tunable wave attenuation mechanism by controlling electric circuits to achieve a negative effective stiffness. In ...