Gate degradation in high electron mobility transistors (HEMTs) under OFF-state stress results from the high electric field near the gate edge. We investigate the evolution of this field over time in AlGaN/ GaN HEMTs upon OFF-state stress using a combination of electroluminescence (EL) microscopy and spectroscopy. EL analysis suggests that the electric field at the sites of generated surface def...

This paper investigates the free edge effect on the stress field of a carbon fiber, which is embedded into an epoxy matrix. The fiber is assumed to possess cylindrical symmetry and to be transversely isotropic. The matrix is assumed to be of an isotropic material. The stress field is induced by a uniform tension applied on the matrix at points far away from the fiber surface. The displacement a...

Due to high surface-to-volume ratio of nanoscale structures, surface stress effects have a significant influence on their behavior. In this paper, a two-dimensional problem for an elastic layer that is bonded to a rigid substrate and subjected to an inclined concentrated line load acting on the surface of the layer is investigated based on Gurtin-Murdoch continuum model to consider surface stre...

Background and Objective: Skin ulcers and their slow healing are considered as one of the important medical aspects. Nowadays, various antibiotics and materials are used to accelerate the wound healing process. One of the methods taken in the field of wound healing is using ozone. On the other hand, one of the factors that hurt the speed of wound healing is stress. Therefore, the present study ...

The effect of the ultrasonic surface rolling process (USRP) on the rotary bending fretting fatigue (FF) of Ti-6Al-4V alloy was investigated. The reason for the USRP's ability to improve the FF resistance of Ti-6Al-4V alloy was studied. The results revealed that the USRP induced a compressive residual stress field with a depth of 530 μm and a maximum residual stress of -930 MPa. Moreover, the su...

It has been pointed out by some researchers that road pavements are subjected to vertical stress due to vehicles on them as well as shear stress at the time of braking or acceleration of vehicles. In this paper, the results of elastic analysis to obtain the rigorous solution for an elastic two-layer system subjected to surface shear stress are described and it is shown that the effect of shear ...

This study presents the deflection, resonant frequency and stress results of rectangular, triangular, and step profile microcantilevers subject to surface stress. These cantilevers can be used as the sensing element in microcantilever biosensors. To increase the overall sensitivity of microcantilever biosensors, both the deflection and the resonant frequency of the cantilever should be increase...

Microcantilever biosensors in the static operation mode translate molecular recognition into a surface stress signal. Surface stress is derived from the nanomechanical cantilever bending by applying Stoney's equation, derived more than 100 years ago. This equation ignores the clamping effect on the cantilever deformation, which induces significant errors in the quantification of the biosensing ...

Hepatitis B virus (HBV) codes for three forms of surface protein. The minor, large form is translated from transcripts specified by the preS1 promoter, while the middle and small forms are translated from transcripts specified by the downstream S promoter. When the large surface protein is overexpressed, the secretion of both subviral and virion particles is blocked within the secretory pathway...