Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inor...

The research presented in this article is a wear volume analysis of the effects of silver nanoparticles in a polyethylene-glycol lubricant (PEG). The ball-ondisk method was used to perform the tests and a surface profilometer was used to analyze the amount of wear produced by this nanolubricant. The results showed that with the addition of silver nanoparticles, the wear was reduced significantl...

A novel method for preparing eco-biodegradable lubricant based on hydroxypropyl methylcellulose (HPMC) via hydration process is demonstrated. The smooth and homogeneous HPMC coating has a uniform thickness (~35 μm). It has been demonstrated that the preparation parameters play a critical role in controlling the lubricating behavior of the coating; in addition, excess HPMC and water concentratio...

ethylene bis-stearamide is one of the important acrylonitrile-butadiene-styrene ()abs)( polymer additives, which is used as lubricant, slip agent and mold release agent. in this research, ethylene bis-stearamide for abs application was synthesized using stearic acid and ethylene diamine under reflux condition. refluxing prevented ethylenediamine from evaporation and thus the initial molar ratio...

en-ac 48000 aluminum alloy is an important alloy in industries. machining of this alloy is of vital importance due to built-up edge and tool wear. three type of cutting tools including coated carbide (cd1810), uncoated carbide (h10), and polycrystalline diamond (cd10) have been used in this research in this paper, the effect of machining parameters including lubricant emulsion percentage and to...

This article presents an investigation of the dynamical contact between two atomically flat surfaces separated by an ultrathin lubricant film. Using a thermodynamic approach we describe the second-order phase transition between two structural states of the lubricant which leads to the stick-slip mode of boundary friction. An analytical description and numerical simulation with radial distributi...

Introduction In general, the twentieth century marked the first major incursion of chemists into the world of tribology. Driven partly by the need for improved lubricants for new machines developed in the first few decades of the century, and partly by new analytical capabilities, lubricant chemists and tribochemists were to become full partners in the science of tribology. In this review we co...

Lubrication is a phenomenon of immense practical importance and fundamental scientific interest, and the automobile engines of the future are envisioned by the Partnership for a New Generation Vehicle will require the development of improved lubricants that perform well at higher operating temperatures and higher engine speeds. The rheological properties of liquid alkanes of intermediate molecu...

Topical glaucoma therapy is a long termed, usually lifelong. Antiglaucomatous drugs have toxic effects on ocular surface, due to preservative toxicitiy or the drug itself. Adding a lubricant eyedrops to antiglaucomatous therapy, especially if considering the preservative used, can have protective effect. The purpose of this study was to evaluate the stabilty of precorneal tear film in glaucoma ...

The loss of an eye is an emotional and psychological setback to the patient. An ocular prosthesis is created to restore the lost anatomical structure and to correct the cosmetic defect. The tear reflexes do not function at optimal levels in anophthalmic sockets which make prosthesis wear uncomfortable. This case report presents an innovative hollow ocular prosthesis with functional lubricant re...