Direct Torque Control of inverter-fed Induction Machine allows high dynamic performance by means of very simple control schemes. In this paper various direct torque control methodologies as conventional DTC (C_DTC), modified DTC (M_DTC) and twelve sectors (12_DTC) have been analysed and compared in order to evaluate the influence of the motor operating condition on steady state performances. A ...

Direct torque control (DTC) is a control technique in AC drive systems to obtain high performance torque control. The classical DTC drive contains a pair of hysteresis comparators and suffers from variable switching frequency and high torque ripple. These problems can be solved by using space vector depending on the reference torque and flux. In this paper the space vector modulation technique ...

This paper presents Electric Vehicle (EV) propulsion using a three phase squirrel cage induction motor. The motor control at different operating conditions is carried out by a direct torque control technique with an energy optimization strategy. The operating flux of the motor is chosen optimally using model based control strategy. Simulation tests have been carried out using MATLAB SIMULINK to...

OBJECTIVE The purpose of this study was to evaluate the influence of 350-rpm rotational speed on the failure incidence of ProFile nickel-titanium rotary instruments (PRI) when used by an experienced operator in conjunction with different motors. STUDY DESIGN Extracted human mandibular and maxillary first and second molars demonstrating curvatures greater than 25 degrees were used. PRI sizes 4...

This paper presents the method of reducing torque ripple of brushless DC (BLDC) motor. The commutation torque ripple is reduced by control of the DC link voltage during the commutation time. The magnitude of voltage and commutation time is estimated by a neural network and optimized with an optimization method named particle swarm optimization (PSO) algorithm analysis. The goal of optimization ...

The delay of the sensory-motor feedback loop is a destabilizing factor within the neural control mechanism of quiet standing. The purposes of this study were 1) to experimentally identify the neuro-musculo-skeletal torque generation process during standing posture, and 2) to investigate the effect of the delay induced by this system on the control mechanism of balance during quiet standing. Ten...

The direct torque control theory has achieved great success in the control of permanent magnet synchronous motor. A Direct Torque Control (DTC) scheme of Permanent Magnet Synchronous Motor (PMSM) is presented. Based on in-depth analysis of PMSM mathematical model in abc frame and αβ frame are established and the operation principle of DTC-SVPWM system, the relationships between the torque and f...

The importance of control systems and diagnostics in vehicles are increasing and has resulted in several newmethods to calculate better control signals. The performance can be increased by calculating these signals close to optimum, but that also require more and precise information regarding the system. One of the wanted control signals are the crankshaft torque and the thesis presents two dif...

In the conventional DTC, the selected voltage vector is applied for the whole switching period regardless of the magnitude of the torque error. This can result in high torque ripple. A better drive performance can be achieved by varying the duty ratio of the selected voltage vector during each switching period according to the magnitude of the torque error and position of the stator flux. A dut...

Control methods for pulsation of torque reduction for the surface-mounted permanent magnet motors are discussed in the paper. The pulsation torque is a consequence of the non-sinusoidal flux distribution and due to interaction of the rotor’s permanent magnets with the changing stator reluctance. Proposed control method is estimator based. To assure parameter convergence Lyapunov’s direct method...