نتایج جستجو برای: ultrafine grain
تعداد نتایج: 65667 فیلتر نتایج به سال:
Large-scale production of high purity (99.999%), nano-twinned, and ultrafine-grained copper foils (22 m thick) was successfully implemented by the use of nanoscale multilayer technology. The process allows the production of up to fourteen 10 cm diameter foils during a single deposition run with high levels of reproducibility. Mechanical tests demonstrate that the strength of the Cu foils (σy ∼ ...
Microstructures in nature are ultrafine and ordered in biological roles, which have attracted material scientists. Spirulina forms three-dimensional helical microstructure, one of remarkable features in nature beyond our current processing technology such as lithography in terms of mass-productivity and structural multiplicity. Spirulina varies its diameter, helical pitch, and/or length against...
Nanostructured (NS) and ultrafine-grained (UFG) materials have high strength and relatively low ductility. Their toughness has not been comprehensively investigated. Here we report the Charpy impact behavior and the corresponding microstructural evolutions in UFG Cu with equi-axed and elongated grains which were prepared by equal channel angular pressing (ECAP) for 2 and 16 passes at room tempe...
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
The influence of Mo alloying on the thermal stability of grain size, dislocation density and hardness of ultrafine-grained (UFG) Ni alloys was studied. The UFG microstructure in alloys with low (∼0.3 at.%) and high (∼5 at.%) Mo contents was achieved by high-pressure torsion (HPT) performed for 20 turns at room temperature. The thermal stability of the two alloys was studied by calorimetry. A Cu...
Metallographic, X-ray diffraction and magnetometric analysis were used to study the regularities of martensitic transformation in melt-spun ribbons of a Fe - 28 wt. % Ni - 2.1 wt. % Ti - 2 wt. % Al - 0.05 wt. % C alloy. The substantial differences in volume fractions of the martensite phase in local regions of thin melt-spun ribbons of the alloy are related to the size effect of the transformat...
Klein LW, Stewart JC, Oberdorster G, Frampton MW. Ultrafine particles activate platelets in vitro. American Journal of Respiratory and Critical Care Medicine 2007;175:A169. not available Abstract Shah AP, Stewart JC, Klein LW, Utell MJ, Frampton MW. Effects of carbon ultrafine particles on platelet activation. Proceedings of the American Thoracic Society 2006;3:A551. not availableShah AP, Stewa...
The microstructure and composition evolution of FeCoNiCrMn high entropy alloy during extreme deformation with a strain rate 108–109 s−1 induced by cold spray technology was investigated. In the region experiencing extremely large deformation, ultrafine nanograins an average size smaller than 100 nm were formed due to occurrence dynamic recrystallization. Additionally, rapid redistribution segre...
A solid-phase diffusion welding of coarse-grained and ultrafine-grained (UFG) specimens titanium near-α alloy Ti-5Al-2V used in nuclear power engineering was made by Spark Plasma Sintering. The failure the welded conditions hot salt corrosion electrochemical shown to have a preferentially intercrystalline character. In case presence macrodefects, crevice joints observed. resistance alloys again...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید