metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

This work presents the effect of various wear environments like 20% soil & 80% sand and 40% soil & 60% sand on as received and carburized mild steel sample at different load like 75N, 200N & 375N and at different tempering temperature like 200oC, 250oC & 300oC. The mild steel sample was carburized at 950oC. The heat treatment after carburization has been acknowledge that at some instant it impr...

This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...

It is well known that injection of glass fibre–reinforced plastics (GFRP) causes abrasive wear in moulds’ cavities and runners. Physical vapour deposition (PVD) coatings are intensively used to improve the wear resistance of different tools, also being one of the most promising ways to increase the moulds’ lifespan, mainly when used with plastics strongly reinforced with glass fibres. This work...

As a result of its widespread and pervasive economic consequences wear, the almost inevitable companion of friction, has been the subject of much scientific and empirical investigation; the literature is rich with ‘wear equations’ so that, on occasion, the practitioner can seem to have too much information rather than too little. Some guidance and reconciliation between analytical and computati...

BACKGROUND Although attritive and abrasive wear of recent composite resins has been substantially reduced, in vitro wear testing with reasonably simulating devices and quantitative determination of resulting wear is still needed. Three-dimensional scanning methods are frequently used for this purpose. The aim of this trial was to compare maximum depth of wear and volume loss of composite sample...

Current commercial polymer membranes have shown high performance and durability in water treatment, converting poor quality waters to higher quality suitable for drinking, agriculture and recycling. However, to extend the treatment into more challenging water sources containing abrasive particles, micro and ultrafiltration membranes with enhanced physical durability are highly desirable. This r...

Ni-based alloy powders with different contents of cobalt (Co) have been deposited on a 42CrMo steel substrate surface using a fiber laser. The effects of Co content on the microstructure, composition, hardness, and wear properties of the claddings were studied by scanning electron microscopy (SEM), an electron probe microanalyzer (EPMA), X-ray diffraction (XRD), a hardness tester, and a wear te...