A new and inexpensive lignocellulose/montmorillonite (LNC/MMT) nanocomposite was prepared by a chemical intercalation of LNC into MMT and was subsequently investigated as an adsorbent in batch systems for the adsorption-desorption of Ni(II) ions in an aqueous solution. The optimum conditions for the Ni(II) ion adsorption capacity of the LNC/MMT nanocomposite were studied in detail by varying pa...

The potential of economically cheaper cellulose containing natural materials like rice husk was assessed for nickel adsorption from aqueous solutions. The effects of pH, contact time, sorbent dose, initial metal ion concentration and temperature on the uptake of nickel were studied in batch process. The removal of nickel was dependent on the physico-chemical characteristics of the adsorbent, ad...

This study explored the possibility of recovering waste powder from photonic industry into two useful resources, sodium fluoride (NaF) and the silica precursor solution. An alkali fusion process was utilized to effectively separate silicate supernatant and the sediment. The obtained sediment contains purified NaF (>90%), which provides further reuse possibility since NaF is widely applied in ch...

The adsorption characteristics of arsenic on laterite soil, a low-cost natural adsorbent, were studied in the laboratory scale using real-life sample. The studies were conducted by both batch and continuous mode. Laterite soil was found to be an efficient adsorbent for arsenic removal from the groundwater collected from arsenic affected area. The initial concentration of arsenic in the sample w...

Separation of carbon dioxide and methane is an important issue in upgrading low-quality natural gas. Adsorption equilibria and kinetics of CO(2) and CH(4) on a copper metal-organic framework (MOF), Cu(hfipbb)(H(2)hfipbb)(0.5) [H(2)hfipbb=4,4'-(hexafluoroisopropylidene) bis(benzoic acid)], were investigated to evaluate the feasibility of removing CO(2) from CH(4) in a pressure swing adsorption p...

This study proposed an oil palm by-product as a low-cost adsorbent for the removal of hexavalent chromium [Cr (VI)] from aqueous solution. Adsorption of Cr (VI) by sulphuric acid and heat-treated oil palm fibre was conducted using batch tests. The influence of pH, contact time, initial chromium concentration and adsorbent dosage on the removal of Cr (VI) from the solutions was investigated. The...

In this study, adsorption of copper from aqueous solutions was investigated using mangrove biomass from the Kenyan Coast. The efficacy of mangrove biomass on the removal of copper (II) ions from aqueous solutions was investigated in single state in batch mode with respect to effects of initial pH, temperature, initial concentration of the metal ion, adsorbent dosage and contact time on metal io...

Cationic dye - basic red 2 (BR2) was removed from aqueous solutions by sulfuric acid activated waste Gossypium hirsutum seeds (WGSAB). The main and interactive effects of five process variables such as, adsorbent dose (1.25 – 5 g/L), initial dye concentration (100–300 mg/L), contact time (1–3 h),  pH (2 – 12) and temperature (20 – 400C) were investigated via  response su...

Wastewater effluents from textile industry mainly contain dyes used in the dyeing or printing of textiles yarns or fabrics. A lot of technologies can be adopted for dye removal from wastewaters, including biological treatments based on activated sludge, adsorption on activated carbon, or membrane processes. Nevertheless, none of these methods is performing toward all classes of dyes; treatment ...

In vitro adsorption of plasma proteins such as immunoglobulin (Ig)-G and IgM without the removal of albumin and fibrinogen forms the basis of the field of therapeutic immunoadsorption. In the present study, we investigated the activities of adsorbents with thienyl amino acids, tryptophan, or phenylalanine as ligands. IgG adsorption by an adsorbent with a thienyl amino acid ligand was lower than...