Single-atom catalysts have attracted much interest recently because of their excellent stability, high catalytic activity, and remarkable atom efficiency. Inspired by the recent experimental discovery of a highly efficient single-atom catalyst Pd1/γ-Al2O3, we conducted a comprehensive DFT study on geometries, stabilities and CO oxidation catalytic activities of M1/γ-Al2O3 (M=Pd, Fe, Co, and Ni)...

Friction stir welding is a solid state joining process first used for welding of Aluminum and its alloys, is now employed for welding of polymers and composite materials. Polypropylene (pp) is one of polymer materials used in many applications due to its good performance, high strength to weight ratio and excellent processing properties, its application is limited due to its weak abrasive prope...

The effect of 5 different surface conditioning methods on bonding of metal brackets to cast dental alloys was examined. The surface conditioning methods were fine (30-microm) or rough (125-microm) diamond bur, sandblasting (50-microm or 110-microm aluminum oxide [Al2O3]), and silica coating (30-microm silica). Fifty disc-shaped specimens of 5 different alloys (gold-silver, palladium-silver, nic...

A reliable and CMOS-compatible deposition process for amorphous Al2O3 based active photonic components has been developed. Al2O3 films were reactively sputtered, where process optimization was achieved at a temperature of 250 C, with a deposition rate of 8.5 nm/min. With a surface roughness of 0.3 nm over a 1 μm area, background optical losses as low as 0.1 dB/cm were obtained for undoped films...

Atomic layer deposition (ALD) has been widely reported as a novel method for thin film encapsulation (TFE) of organic light-emitting diodes and organic photovoltaic cells. Both organic and inorganic thin films can be deposited by ALD with a variety of precursors. In this work, the performances of Al2O3 thin films and Al2O3/alucone hybrid films have been investigated. The samples with a 50 nm Al...

Dissipative two-level systems (TLS) have been a long-standing problem in glassy solids over the last fifty years, and have recently gained new relevance as sources of decoherence in quantum computing. Resonant absorption by TLSs in the dielectric poses a serious limitation to the performance of superconducting qubits; however, the microscopic nature of these systems has yet to be established. B...

Alloys Fe-(0, 5, 10)Cr-10Al (all in at.%) were oxidized at 900 o C in 1 atm oxygen to study the effect of Cr additions on the oxidation behavior. The oxidation kinetics was recorded with a thermal microbalance. The morphologies and microstructures of the oxide scales were examined using SEM, EDS, and XRD. Fe-10Al developed an Al2O3-rich scale during the initial stage of oxidation, and a non-pro...

A novel idea by using copper (Cu) pillar is proposed in this study, which can replace the through-silicon-vias (TSV) technique in future three-dimensional (3D) architecture. The Cu pillar formation under external bias in an Al/Cu/Al2O3/TiN structure is simple and low cost. The Cu pillar is formed in the Al2O3 film under a small operation voltage of <5 V and a high-current-carrying conductor of ...

Two types of ceramic-polymer composite thick films were deposited on Cu substrates by an aerosol deposition process, and their properties were investigated to fabricate optimized ceramic-based polymer composite thick films for application onto integrated substrates with the advantage of plasticity. When polymers with different mechanical properties, such as polyimide (PI) and poly(methyl methac...

The electrical conductivity and density of the low-melting CaCl2-NaCl-Al2O3 systems at 550°C~800°C ranges were respectively measured by the Continuously Varying Cell Constant Technique, ac-techniques and Archimedes method. The materials were applied as the electrolyte for the direct electrochemical reduction solid Al2O3 at 550°C ~800°C. The materials were composed of 71wt.%~87wt.%CaCl2 (corresp...