We used mechanical alloying with a Spex 8000 mixer/mill to synthesize a series of Fe1002xNix alloys from x50 to x549. The Spex mill was modified so that it could also operate at a reduced milling intensity, and we compared the alloys synthesized after long times with the normal and reduced milling intensities. X-ray diffractometry and Mössbauer spectrometry were used to measure the volume fract...

Intermetallic Heusler alloys are amongst the most attractive half-metallic systems due to the high Curie temperatures and the structural similarity to the binary semiconductors. In this review we present an overview of the basic electronic and magnetic properties of both Heusler families: the so-called half-Heusler alloys like NiMnSb and the the full-Heusler alloys like Co 2 MnGe. Ab-initio res...

Present work describes the structural stability and mechanical properties of Ni-based binary and ternary alloys. These alloys have been evaluated using first principles density functional theory (DFT) within generalized gradient approximation (GGA). The equilibrium lattice constant values of the phase in these alloys are in good agreement with the experimental data obtained by X-ray diffraction...

A series of biodegradable Mg-Cu alloys is designed to induce osteogenesis, stimulate angiogenesis, and provide long-lasting antibacterial performance at the same time. The Mg-Cu alloys with precipitated Mg2Cu intermetallic phases exhibit accelerated degradation in the physiological environment due to galvanic corrosion and the alkaline environment combined with Cu release endows the Mg-Cu alloy...

The role of Mg2Si in the electrochemical behavior of Al-Si-Mg aluminum alloys has been studied using four experimental aluminum alloys with variations in the Si/Mg molar ratio (A1-0.12, A2-0.49, A3-0.89, A4-1.05), in neutral aerated 0.1M NaCl solutions. Accordingly, the corrosion potential in open circuit (Eoc) and polarization resistance (Rp) were measured. Results show that the augment in Si/...

Nine Al-(1-3)Mg-(0-0.4)Cu-0.15Si-0.25Mn (in wt%) alloys with potential applications in both packaging and automotive industries have been investigated. Tensile testing showed that solution strengthening is in good approximation linearly proportional to the Mg content. Mechanical testing and microstructural examinations of aged samples indicate that Mg2Si phase precipitates contribute to age har...

Ordering process and age-hardening mechanism of CuPd-AuCu pseudo-binary alloys were examined In alloys with electron-atom ratios (e/a)<0.87, short range ordering was observed in the early stage of aging, thereafter, long range ordering occurred from grain boundaries by heterogeneous ordering mecha nism. Age-hardening of these alloys was attained by the increase in volume fractions of CuPd and/o...

Continuing our work on understanding the oxidation behavior of multiphase composite alloys based on the Mo-Si-B system, we investigated three alloys in the Mo-Si-B system, designated as A1, A2, and A3. The nominal phase assemblages of these alloys are: A1 = Mo5Si3Bx (T1)-MoSi2-MoB, A2 = T1Mo5SiB2 (T2)-Mo3Si, and A3 = Mo-T2-Mo3Si. Our previous work showed that for exposures to 1100°C, all alloys...

OBJECTIVE The purpose of this study was to use x-ray diffraction (XRD) to obtain new information about the oxide layers on four representative oxidized high-palladium alloys. METHODS Cast specimens of two Pd-Cu-Ga alloys and two Pd-Ga alloys, with both polished and etched surfaces and air-abraded surfaces, were subjected to oxidation procedures recommended by the manufacturers. The specimens ...

The research work examined the effect of the removal of iron from aluminium-silicon alloys using dopants on the structure and mechanical properties. Manganese, cobalt and molybdenum were used as the modifying elements. The as-cast Al Si alloys were analyzed for iron content using Atomic Absorption Spectrometer (AAS) technique. The dopants or modifying elements were added as micro additives at v...