morphology of surface oxide film formed during pouring of molten magnesium alloy has been investigated. due to surface turbulence during casting, the oxide film necessarily makes folded cause in a dry surface to dry surface mode creating a double oxide film with the volume of air that can be encapsulated between folds of the film and this led to make gas bubbles or shrinkage cavities form. thes...

Mg-based alloys as revolutionary implantable biomaterials have increasingly attracted considerable attention, owing to their biodegradability in vivo and beneficial effects on biological systems. The degradation process products of been reported exhibit significant host-tissue responses. However, these not yet fully understood. This review systemically summarizes analyses the current understand...

Mechanical behavior, biocompatibility in body environment and tissues and chemical stability are the most important requirements for the effective application of any bio-implant materials in the human body. Among the known metals and alloys, stainless steels, CoCr alloys and Ti and its alloys are the most widely used materials in such applications. In case of their use, one of the most importan...

composite solid propellants were prepared with and without nano-alloys (ti-co, ti-ni, ti-zn), where nano-alloys used as catalyst. these nano-alloys are prepared by hydrazine reduction method. catalytic properties of these nanomaterials were measured on ammonium perchorate/hydroxyterminatedpolybutadiene propellant by thermogravimetery analysis and differential thermal analysis. both experimental...

introduction: evaluation of bonding in atomic level, by sem/eds analysis of si atoms, is an exact method for determination of bond strength of metal and porcelain. the purpose of this study was to evaluate the bond strength of one noble alloy and two base metal alloys with and without beryllium. methods and materials: six specimens of each alloy begostar, rexillium iii, wiron 99 (10×10×1mm dime...

abstract – aluminium 7075- t651 alloys are widely used in the production of light weight structures requiring a high strength to weight ratio and high corrosion resistance. the effect of processing parameters on fatigue life of 7075- t651 aluminium joints produced by friction stir welding was investigated in the present study. welding samples were made by employing rotating tool speed of 770, 9...

Ribbons of Fe100−xGax (x = 15, 17.5, 19.5 and 22.5) were prepared by rapid solidification from the melt. Fe Mössbauer spectroscopy and high resolution neutron diffraction have revealed that Fe100xGax alloys with x = 15 and 17.5 have the disordered bcc (A2) structure even after annealing, but the alloy with x = 19.5 developed the short-range ordered D03 phase when annealed. The x = 22.5 alloys s...

Background: To determine the role of drugs in fatal overdose, analyses were done on samples obtained from autopsy examination and death and crime scene investigations. The aim of this study was to evaluate the usefulness of toxicology analyses of postmortem biological and non-biological samples belonging to a subject in determining the forensic cause of death. Methods: Toxicological analysi...