Microstructured optical fibers containing alkali halide scintillation materials of CsI(Na), CsI(Tl), and NaI(Tl) are presented. The scintillation materials are grown inside the microstructured fibers using a modified BridgmanStockbarger technique. The x-ray photon counts of these fibers, with and without an aluminum film coating are compared to the output of a collimated CdTe solid state detect...

Quartz fibers are used in high energy physics experiments as the active medium in high radiation area calorimetry. Quartz fibers are also used in the transmission of optical signals. Even though quartz does not damage by moderate amounts of irradiation, the clad of the fibers and the protective coating (buffer) do damage reducing light transmission. Various types of quartz fibers have been irra...

As far as we know this is the first report on picosecond green-light generation from an actively mode-locked diode-pumped self-doubling neodymium yttrium aluminum borate (NYAB) laser. The pulse width is approximately 100 ps and is limited by imperfect antireflection coating and the intracavity doubling effect. The green average output power of this laser for mode-locked operation was more than ...

This paper describes MEMS deformable polymer mirror system for adaptive optics application. This system employs a 4 μm thick SU-8 membrane with a stress balanced double side aluminum coating as a mirror element. Underlying Lorentz actuators are used to control the surface topography of the mirror, enabling optical wavefront correction. Compared to electrostatic, piezoelectric, and thermal actua...

A novel highly sensitive optical NO2-selective sensor was developed using phthalocyaninato-iron(II) as a selective complexing agent. In order to solubilize the ironII+phthalocyanine and to obtain the monomer species, a N-donor ligand was used as a solvent. The membrane solution was deposited onto a novel aluminum oxide/hydroxide nanoporous material by a spin-coating technique. The chemical reac...

A novel, chemical-etching technique produces very high throughput, polarization-maintaining probes for near-field, scanning, optical microscopy (NSOM). The process includes coating the tips with aluminum and forming the apertures with a focused ion beam (FIB). The elliptical core fibers used resulted in elliptical apertures for the probes. The throughput of the probes depends on the incident po...

This research aim to optimize two kinds of cathode material, LNCA and lithium manganese rich materials (LNMC), which are potential cathodes of EV since their high theoretical specific capacity. However several drawbacks need to be improved such as their low cycling performance, unstable structure, and fast voltage fading. In this project doping other ions (Na, K, Al, Sn) replacing Ni and Mn ion...

Practical application of superhydrophobic surfaces is limited by the fragility of nanoscale asperities. Combining chemical etching and anodization, microscale pits and nanoscale pores, instead of the micro and nano protrusions on traditional superhydrophobic surfaces mimicking Lutos leaves, were fabricated on commercially pure aluminum surfaces. After modified by FDTS, the surfaces were superhy...

We report ultrasensitive and label-free detection of 2,4,6-trinitrotoluene (TNT) deposited by drop coating using deep-ultraviolet surface-enhanced resonance Raman scattering (DUV-SERRS). Well-defined aluminum nanoparticle arrays as the SERRS substrate at 257 nm excitation wavelength enabled highly reproducible and real-time detection of TNT down to the detection limit of the attogram level in q...

A long-period grating (LPG) based compact optical fiber sensor working in reflection mode is demonstrated. A technique to make a mirror on the cladding region of a fiber end-face to reflect only the cladding modes was realized by growing a polymeric microtip on the core region of the fiber end-face, by photopolymerization, followed by coating the fiber end-face with an aluminum film. Using the ...