This paper reports the design, optimization, and test results of a mechanical amplifier coupled to an electromagnetic energy harvester to generate power from lowamplitude (±1 mm) and low-frequency (<5 Hz) vibrations in the presence of large static displacements. When coupled to a translational kinetic energy harvester, the amplifier boosts small vibration amplitudes by as much as 4x while accom...

The present study attempted to design and evaluate a small portable electromyogram (EMG) amplifier that can output enhanced EMG and its root mean square (RMS) value. The production and design were of a laboratory scale without any special or high cost circuit construction. The designed amplifier was actually innovated according to the actual working conditions based on physiological anthropolog...

Abstract—In this paper, a CMOS differential operational transresistance amplifier (OTRA) is presented. The amplifier is designed and implemented in a standard umc90-nm CMOS technology. The differential OTRA provides wider bandwidth at high gain. It also shows much better rise and fall time and exhibits a very good input current dynamic range of 50 to 50 μA. The OTRA can be used in many analog V...

We propose and investigate experimentally a tunable and stable fiber laser with single-longitudinal-mode (SLM) and power-equalized output based on a two-stage erbium amplifier and a saturable-absorber filter. Two-stage amplifier consists of an erbium-doped waveguide amplifier (EDWA) and erbium-doped fiber amplifier (EDFA) to generate a flatter amplified spontaneous emission (ASE) source for con...

This paper presents the design and implementation of a fully integrated transimpedance amplifier (TIA) as the analog frontend receiver for Capacitive Micromachined Ultrasound Transducers (CMUTs) for ultrasound biomicroscope imaging application. The amplifier is designed to amplify the received signals from 17.5MHz to 52.5MHz with a center frequency of 35MHz. The TIA was fabricated in GF 0.18μm ...

High-resolution electronic interface circuits for transducers with nonlinear capacitive impedance need an operational amplifier, which is stable for a wide range of load capacitance. Such operational amplifier in a conventional design requires a large area for compensation capacitors, increasing costs and limiting applications. In order to address this problem, we present a gain-boosted two-sta...

A modular patch-clamp amplifier was constructed based on the Strickholm design, which was initially published in 1995. Various parts of the amplifier such as the power supply, input circuit, headstage, feedback circuit, output and nulling circuits were redesigned to use recent software advances and fabricated using the common lithographic printed circuit board fabrication process and commercial...

In this paper Broadband Reconfigurable low Noise Amplifier for Multiband Application is presented. Low noise amplifier is versatile demanded in modern technology, technology demanded amplifier have less reflection and more rejection of noise, in this paper presented differential cross feedback topology and feedback technique for designing of Broadband Reconfigurable low Noise Amplifier, the req...

A single-stage 24 GHz triple stacked power amplifier using 0.13 μm CMOS process is demonstrated. To Compare with parallel current combining method, series voltage combining method using a stacked amplifier architecture can realize a large output voltage swing from the top transistor without exceeding the transistor breakdown voltage limitations. However, at high frequencies, parasitic capacitan...

A wideband variable gain amplifier (VGA) design is introduced with two different schemes. It is based on a fully differential amplifier with resistive loads, and a Negative Miller Capacitance technique is used to increase the bandwidth of the amplifier. The amplifier consists of three stages, and the gain is varied through the second and third stages, where they are degenerated by a voltage con...