Fluidized beds are being used in practice to gasify biomass to create producer gas, a flammable gas that can be used for process heating. However, recent literature has identified the need to better understand and characterize biomass fluidization hydrodynamics, and has motivated the combined experimental-numerical effort in this work. A cylindrical reactor is considered and a side port is intr...

Treatment of domestic waste is generally carried out by activated sludge process. The waste solid sludge can be treated by various aerobic and anaerobic treatment processes. Aerobic treatment methods need space and time. Anaerobic treatments have advantages such as space utilization and production of fuel gases such as methane. Up flow anaerobic sludge digester or fluidized bed digester can be ...

Fluidized bed processing is a relatively novel method for coating metal substrates. A detailed study was carried out into surface property and in micro-structure changes induced by fluidized bed processing. In particular, fluidized bed processing of AA 6082 T6 aluminum alloy components using alumina Al2O3 powder was investigated. Firstly, the build up of Al2O3 films was studied and characterize...

Fluidized beds are used to gasify materials such as coal or biomass in the production of producer gas. Modeling these reactors using computational fluid dynamics is advantageous when performing parametric studies for design and scale-up. While two-dimensional simulations are easier to perform than threedimensional simulations, they may not capture the proper physics. This paper compares twoand ...

Oxygen carriers play an important role in chemical looping processes to transport oxygen for fuel conversion. In this study, the defluidization phenomena of were examined under highly reducing conditions a fluidized-bed batch reactor. This is relevant chemical-looping gasification, where could be reduced significant extent compared that combustion. Only few studies have reported physical fluidi...

The mechanism of vibration energy transfer in a vibrating fluidized bed (VFB) is reported in this paper. A series of sensors was employed to simultaneously detect pressure wave propagation signals at different positions at various heights in the fluidized bed. The mechanism of vibration energy transfer in an VFB is found by wave propagation. The pressure wave was produced from a vibrating base ...

The influence of particle residence time distribution on the average conversion rate (or reactivity) of particles undergoing a non-catalytic gas-solid reaction inside a continuously operated fluidized bed reactor is evaluated. A so-called &factor is defined as the ratio of the actual reactivity in the reactor and the reactivity of a batch of particles that react under similar circumstances and ...

drying properties of high moisture potato slices with initial moisture content of about 4.06 (db) under thin layer fixed, semi fluidized and fluidized bed conditions were studied. drying air temperatures of 40, 50, 60 and 70°c were applied in experiments using a laboratory fluidized bed convective dryer. in order to predict the drying behavior of potato slices, seven thin layer drying models we...