نتایج جستجو برای: auger electron spectroscopy
تعداد نتایج: 450078 فیلتر نتایج به سال:
A~~act-Semi~uantitative Auger Electron Spectroscopy (AES) on pure monophasic (Z~*)~.~(YO,.~~,,, was used to determine the chemical composition of the grain boundaries. Grain boundary enrichment with Y was observed with an enrichment factor of about 1.5. The difference in activation energy of the ionic conductivity of the grain boundary compared with the bulk can be explained by the Y segregatio...
The chemical composition, nanostructure and electronic structure of nanosized oxide scales naturally formed on the surface of AISI 316L stainless steel microfibres used for strengthening of composite materials have been characterised using a combination of scanning and transmission electron microscopy with energy-dispersive X-ray, electron energy loss and Auger spectroscopy. The analysis reveal...
The carbon nanostructure composed of an array of vertically aligned carbon nanotubes (CNTs) and a planar graphite layer (PGL) located at the top of the array has been obtained by the injection chemical vapor deposition method, realized using high temperature catalytic pyrolysis of xylene-ferrocene mixture. The carbon nature of the planar layer was identified using Auger electron spectroscopy. S...
We report the reduction of transient drifts in the zero pressure offset voltage in silicon carbide (SiC) pressure sensors when operating at 600 °C. The previously observed maximum drift of ± 10 mV of the reference offset voltage at 600 °C was reduced to within ± 5 mV. The offset voltage drifts and bridge resistance changes over time at test temperature are explained in terms of the microstructu...
The oxidation kinetics of two metallic glasses have been studied by ellipsometry and Auger Electron spectroscopy. We have found that the presence of chromium in Fe based alloys has a marked influence on the thickness of corrosion film formed and on the kinetics of film formation. INTRODUCTION measured after various exposures to the high Several authors have reported that amorphous iron based al...
Carbon steel is a preferred construction material in many industrial and domestic applications, including oil and gas pipelines, where corrosion mitigation using film-forming corrosion inhibitor formulations is a widely accepted method. This review identifies surface analytical techniques that are considered suitable for analysis of thin films at metallic substrates, but are yet to be applied t...
Using Auger Electron Spectroscopy (AES), Scanning Tunneling Microscopy/Spectroscopy (STM/STS) and Low Energy Electron Diffraction (LEED), we report an in-situ study of amorphous magnesium silicide (Mg2Si) ultra-thin films grown by thermally enhanced solid-phase reaction of few Mg monolayers deposited at room temperature (RT) on a Si(100) surface. Silicidation of magnesium films can be achieved ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید