Theoretical models for the frequency response of a cantilever beam immersed in a viscous fluid commonly assume that the fluid is unbounded. Experimental measurements show, however, that proximity to a surface can significantly affect the frequency response of a cantilever beam. In this article, we rigorously calculate the effect of a nearby surface on the frequency response of a cantilever beam...

The present study investigates the effects of thermal conduction and convection on self-heating temperatures and bimetallic deflections produced in doped microcantilever sensors. These cantilevers are commonly used as sensors and actuators in microsystems. The cantilever is a monolith, multi-layer structure with a thin U-shaped element inside. The cantilever substrate is made of silicon and sil...

In this investigation an elastic stress analysis is carried out a woven steel fiber reinforced thermoplastic cantilever beam loaded uniformly at the upper surface. The composite beam material consists of low density polyethylene as a thermoplastic (LDFE, f.2.12) and woven steel fibers. Granules of the polyethylene are put into the moulds and they are heated up to 160°C by using electrical resis...

In this paper, we present the fabrication and packaging of a cantilever-based airflow sensor integrated with optical fiber. The sensor consists of a micro Fabry-Perot (FP) cavity including a fiber and a micro cantilever that is fabricated using the photolithography method. Airflow causes a small deflection of the micro cantilever and changes the cavity length of the FP, which makes the fringe s...

Structural instability caused by self exciting aerodynamic forces (flutter) can be used as an effective input source for small scale energy harvesters. The self exciting aerodynamic force exerted on a T-shape cantilever causes periodic vibration, which can be converted into electric power through an electromagnetic transducer. Due to the complexities inherent in the fluid-structure interaction ...

Self-sensing techniques for atomic force microscope (AFM) cantilevers have several advantageous characteristics compared to the optical beam deflection method. The possibility of down scaling, parallelization of cantilever arrays and the absence of optical interference associated imaging artifacts have led to an increased research interest in these methods. However, for multifrequency AFM, the ...

In tip-scan atomic force microscopy (AFM) that scans a cantilever chip in the three dimensions, the chip body is held on the Z-scanner with a holder. However, this holding is not easy for high-speed (HS) AFM because the holder that should have a small mass has to be able to clamp the cantilever chip firmly without deteriorating the Z-scanner's fast performance, and because repeated exchange of ...

The vibrational characteristics of a cantilever beam are well known to strongly depend on the fluid in which the beam is immersed. In this paper, we present a detailed theoretical analysis of the frequency response of a cantilever beam, that is immersed in a viscous fluid and excited by an arbitrary driving force. Due to its practical importance in application to the atomic force microscope ~AF...

We describe an atomic force microscope cantilever design for which the second flexural mode frequency can be tailored relative to the first mode frequency, for operation in contact with a substrate. A freely resonating paddle internal to the cantilever reduces the stiffness of the second flexural mode relative to the first while nearly maintaining the mass of the original cantilever. Finite ele...

Structural instability caused by self exciting aerodynamic forces (flutter) can be used as an effective input source for small scale energy harvesters. The self exciting aerodynamic force exerted on a T-shape cantilever causes periodic vibration, which can be converted into electric power through an electromagnetic transducer. Due to the complexities inherent in the fluid-structure interaction ...