One of the primary challenges faced by today’s dental restorative team is the need to deliver high-strength restorative options without compromising the esthetic outcome fueled by ever-increasing patient demands. The availability of improved ceramic materials, bonding techniques, new technology and issues of malgam safety have led to a revival of interest in ceramic inlays in dentistry over the...

Cobalt metallosis after revision metal-on-polyethylene total hip arthroplasty for catastrophic failure of ceramic components is uncommon but a potentially devastating complication. Common findings associated with heavy metal toxicity include cardiomyopathy, hypothyroidism, skin rashes, visual disturbances, hearing changes, polycythemia, weakness, fatigue, cognitive deterioration, and neuropathy...

This paper describes current and on-going work in adapting Z-Corp 3D printers to operate with low-cost ceramic materials. The components produced with these clay-based ceramic powders can be fired to produce strong, complex and lightweight ceramic parts. The final material properties, including the porosity of the parts, can be controlled through the part design and, potentially, through additi...

BACKGROUND This study examines the clinical and radiologic results of ceramic-on-ceramic total hip arthroplasties with regard to wear, osteolysis, and fracture of the ceramic after a minimum follow-up of six years. METHODS We evaluated the results of a consecutive series of 148 primary ceramic-on-ceramic total hip arthroplasties that had been performed between May 2001 and October 2005 in 142...

Ceramic bearing surfaces are being increasingly used in young patients undergoing total hip arthroplasty. However,failures have been reported including fractures even with the newer third generation ceramics. The recommendedtreatment for fracture of ceramic bearing surfaces is complete synovectomy and revision total hip arthroplasty.However, disappointing results have also bee...

Metal ceramic restorations have been implicated for the discoloration in area of labiogingivalmargin. Attempts to rectify this, by altering the design of metal frameworkswill lead to decrease in fracture strength atmargin. This in vitro study compared the fracture strength at margins of metal ceramic crowns cemented to metal tooth analogs. Crowns evaluated with different marginal configurations...

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond laser-treated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zircon...

The purpose of this study was to evaluate the bond strength of metallic orthodontic brackets to feldspathic ceramic with different etching times, bonding materials and with or without silane application. Cylinders of feldspathic ceramic were etched with 10% hydrofluoric acid for 20 or 60 s. For each etching time, half of the cylinders received two layers of silane. Metallic brackets were bonded...

STATEMENT OF PROBLEM Production of a ceramic dental restoration that matches a target shade is dependent on porcelain thickness. Even when adequate porcelain thickness exists, clinical shade matches are difficult to achieve. PURPOSE This study predicted the thickness of dentin porcelain required to obtain a clinical shade match (</=3 DeltaE units) for a variety of dental porcelain systems and...

background: the aim of this study was to determine the microtensile bond strength (μtbs) of ceramic and composite computer aided design‑computer aided manufacturing (cad‑cam) blocks bonded to dentin using different adhesive strategies. materials and methods: in this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junctio...