Coal with low ash content has an important role in the coal and steel industry. There are different methods to measure the ash content. The conventional method which is used in most coal mines of Iran, is to burn the coal and measure the remaining ash. A new method has been recently developed at Nuclear Research Center (NRC) of Iran, Which works on the basis of the absorption of the dual en...

Precisely describing the formation and evolution rules of coal-rock fracturing crack have great value on reservoir fracturing improvement and highly efficient mining of coal bed methane well. In this paper, a non-linear dynamic method is used to study crack damage evolution behavior of coal-rock fracturing. Considering distribution characteristics of natural cracks in coal-rock, and based on da...

Studies of coal surface interactions are important for Understanding how technologically important reagents interact with Coal. Thermodynamic data provide a quantitative means to assess the interactions between reagents and coal. Knowledge of interaction strengths for solutes with coal surfaces should enable the design of more effective coal reaction strategies and lead to better utilization of...

According to the present situations that the construction amount of the gas drainage boreholes in mining seam is large and the gas drainage effect in low permeability coal seams doesn’t yield perfect, the hydraulic reaming technology in mining seam is proposed to increase the gas drainage efficiency. Through the gas flow method, the effective influence radius of hydraulic reaming is determined....

Coal is a major source of energy. The available Indian coal quality is very poor having very high ash content and low calorific value. Indian coal generates a large quantity of ash as a by-product of combustion. The objectives of the present study were to reduce the ash content of coal to produce ultra-clean coal. The coal was treated wi...

Canister desorption is a widely used technique to measure the gas content of coal. The gas content data, when normalized to volume/weight and multiplied by coal seam mass, is used to estimate the gas in place in an area around the cored hole. However, the gas content and the percentage of each constituent are likely to be influenced by trapped air in the canister at the time of the coal enclosu...

The techno-economic aspects of coal drying with cost effective waste heat recovery mechanism is one of the challenging issues faced while using lignite or high ash brown coal for direct combustion in coal fired thermal power plant. Coal being hygroscopic in nature, re-adsorbs considerable moisture even after conventional drying post wet coal washing condition affecting boiler performance. Parti...

Daily average PM(10) (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 microm aerodynamic diameter), TSP (total suspended particulate matter) and their chemical species mass concentrations were measured at residential and industrial sites of an urban region of Kolkata during November 2003-November 2004. Source apportionment using chemic...

Some of the most difficult coal mine roof in the United States can be found in the Illinois Basin. Factors contributing to the high roof fall rate include weak, moisture-sensitive roof rock; high horizontal stress; and limited longwall mining. The depth of cover ranges from 27 to 300 m (90 to 1,000 ft), and roof damage from horizontal stress can be severe. Moisture-sensitive roof rock, which co...

2 Research method Different methods of coal processing into fuel [1, 6, 12] usually require its intensive comminution. Such situation needs the creation of new technologies for coal micronization [4, 11, 17] that enlarge specific surface of coal micro particles what finally intensifies burning process of such coal dust. Some interesting effects of water-coal mixture ensure waterjetting technolo...