We present optical in situ investigations of lithium-ion dynamics lithium iron phosphate based positive electrodes. The change reflectivity these cathodes during charge and discharge is used to estimate apparent diffusion coefficients for the lithiation delithiation process entire electrode. Thereby, a scaling analysis transport applied, which clearly reveals its diffusive character. Results ar...

we used an effective electrochemical sensor for the determination of imipramine at ph 7.2 using a carbon nanocomposite electrode. the electrode has been designed by incorporation of montmorillonite nanoclay into the carbon ionic liquid electrode. the high sensitivity of 1.714 μa (μm)-1, two linear calibration ranges of 0.1–2 μm and 2-40 μm, and detection limit of 19 nm were achieved. the relati...

the glucose oxidase (gox) electrochemical sensors were used to detect a little amount of glucose. in this paper, the pure platinum plate (length of 5 cm and a width of 3 mm), the ag/agcl electrode and platinum electrode (diameter of 1 mm) were applied as a working electrode (w.e), reference electrode and auxiliary electrode sequential. factors measured, glucose concentration and ph is phosphate...

New paradigms are required in Brain-Computer Interface (BCI) systems for the needs and expectations of healthy people. To solve this issue, we explore the emerging field of cooperative BCIs, which involves several users in a single BCI system. Contrary to classical BCIs that are dependent on the unique subject's will, cooperative BCIs are used for problem solving tasks where several people shal...

UNLABELLED The objective of this experimental study was to develop a new combination technique for electrode placement and the histomorphological evaluation of its effectiveness for the electrochemical lysis of large intraocular tumours. MATERIALS AND METHODS The ECL was conducted on two freshly enucleated eyes containing large tumours, with maximal prominence of 11 and 12 mm and maximal base...

A modified electrode was prepared by modification of the carbon paste electrode (CPE) with graphene nano-sheets. The fabricated modified electrode exhibited an electrocatalytic activity toward gallic acid (GA) oxidation because of good conductivity, low electron transfer resistance and catalytic effect. The graphene modified CPE had a lower overvoltage and enhanced electrical current respect to...

the voltammetric performance of edge-plane pyrolytic graphite (epg) electrode via adsorptive stripping voltammetry was investigated for study of the electrochemical behavior of omeprazole (omz) in aqueous solution. the results revealed that the oxidation of omz is an irreversible ph-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mech...

in order to study the cu(ii) ion selective electrode, an optimized membrane was prepared by mixing of 30 mg of pvc powdered, 5 mg of considered ionophore, 60 mg of plasticizer and 5 mg of additive. the sensor showed a near nernstian response for cu(ii) ions over a concentration range from 1.0×0-6 –1.0×0-2 m with a slope of 28.90.5 mv per concentration decade with a working ph range of 3.5-6.3. ...

a sensor, based on multi-wall carbon nanotubes modified glassy carbon electrode (mwcnt/gce), was developed for determination of fenitrothion. determining the surface area of mwcnt/gce showed that this surface is three times more active than that of a glassy carbon electrode. the experimental parameters, such as the amount of mwcnts, ph of the fenitrothion solution, preconcentration potential an...