A process simulation model was constructed for a 2 ton/hr incinerator. The simulation model was designed to provide system performance parameters according to various operating conditions. In accommodating the wide variation of quality and composition of input wastes, the plant operating parameters such as amount of excess air, preheated air temperature, waste feed rate and primary air distribu...

Oxy-fuel combustion is one of the energy utilization technologies for CO2 capture which is ready for commercial demonstration. System steady-state simulation is an effective tool to help us understand the thermodynamic properties and adjust operation conditions of oxy-fuel combustion system. Moreover, dynamic simulation is essential for understanding the dynamic characteristics of the system, w...

Knowledge of the oxidation, ignition and combustion of bulk metals is important for fire safety in the production, management and utilization of liquid and gaseous oxygen for ground based and space applications. This proposal outlines studies in continuation of research initiated earlier under NASA support to investigate the ignition and combustion characteristics of bulk metals under varying g...

Flaring of waste gases is a common practice in the processing of hydrocarbon (HC) materials. It is assumed that flaring achieves complete combustion with relatively innocuous byproducts such as CO2 and H2O. However, flaring is rarely successful in the attainment of complete combustion, because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum valu...

In the Heat Engineering Chair of Poznan University of Technology, there have been investigations carried out for the last 10 years, of heat transfer processes on the wall of a single action internal combustion engine. Investigations of local heat transfer coefficients were carried out in different combustion conditions and the engine was propelled with a methanecarbon dioxide mixture (65% of CH...

Whereas previous emission limit values could be met by primary engine control measures, the limits for PM and NOx from heavy duty engines in 2008/09 (Euro V) and diesel passenger cars in 2014/15 (Euro 6) represent a challenge for the developers of diesel engines and vehicles. Due to the thermodynamics of the Diesel combustion process, it is difficult to optimise the combustion process for both ...

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol exhibited self pr...