Sintered Ti6Al4V powder compacts potentially to be used in implant applications were prepared using commercially available spherical and angular powders (100-200 mum) within the porosity range of 34-54%. Cylindrical green powder compacts were cold compacted at various pressures and then sintered at 1200 degrees C for 2 h. The final percent porosity and mean pore sizes were determined as functio...

This report is concerned with the determination of relationship between asphaltic concrete surface course specifications and the level of performance of pavements constructed under these specifications. The relationship was investigated through comparative evaluation of deficient (in specification) and nondeficient sections using a combination of pavement condition rating and ride rating as the...

In this paper, we present a modified density-dependent Drucker-Prager Cap (DPC) model with a nonlinear elasticity law developed to describe the compaction behavior of pharmaceutical powders. The model is implemented in ABAQUS with a user subroutine. Using microcrystalline cellulose (MCC) Avicel PH101 as an example, the modified DPC model is calibrated and used for finite element simulations of ...

Warm compaction is a process leading to parts with high green strength and density. An increased compacting temperature lowers the flow stress of the metallic particles and increases their ductility, resulting in higher powder compressibility and stronger interparticles bonding, either mechanical or metallurgical. Although many studies have been published on warm compaction, very few investigat...

While measurements of ice-sheet surface elevation change are increasingly used to assess mass change, the processes that control the elevation fluctuations not related to ice-flow dynamics (e.g. firn compaction and accumulation) remain difficult to measure. Here we use radar data from the Thwaites Glacier (West Antarctica) catchment to measure the rate of thickness change between horizons of co...

Introduction: Compaction of bone to create a cavity for a total joint implant is gaining recognition as a bone-saving alternative to methods of cavity preparation that involve only extraction of bone. Advantages of compaction are increased contact area at the implant-bone interface and subsequent improved initial fixation and potential for bone ingrowth. Rasping and drilling are bone extraction...

Test set compaction for combinational circuits is studied in this paper. Two active compaction methods based on essential faults are developed to reduce a given test set. The special feature is that the given test set will be adaptly renewed to increase the chance of compaction. In the first method, forced pair-merging, pairs of patterns are merged by modifying their incompatible specified bits...