The inhibition effect of Vernonia amygdalina (bitter leaf) extract on the corrosion behaviour of embedded mild steel rebar in concrete has been investigated by electrochemical potential measurement, pH and gravimetric (weight loss) methods. The results were further analysed using the two-factor ANOVA test. The experiments were performed using bitter leaf extract as a green inhibitor in 3.5% sod...

The chlorine concentration in Superpozz (SPZ) cement concrete was analyzed using a newly designed prompt gamma-ray neutron activation (PGNAA) setup utilizing a portable neutron generator. The setup, which mainly consists of a neutron source along with its moderator placed side by side with a shielded gamma-ray detector, allows determining chloride concentration in a concrete structure from one ...

A review of the impacts of deicers used in winter maintenance practices of Portland cement concrete and asphalt concrete roadways and airport pavements is presented. Traditional and relatively new deicers are incorporated in this review, including sodium chloride, magnesium chloride, calcium chloride, calcium magnesium acetate, potassium acetate, potassium formate, sodium acetate, and sodium fo...

Chloride induced corrosion of steel reinforcement is the main cause of deterioration of reinforced concrete marine structures. This paper investigates the relative performance of alternative repair options with respect to the deterioration of reinforced concrete bridge elements in marine environments. Focus is placed on the initiation phase of reinforcement corrosion. A laboratory study is desc...

The chloride threshold value (Cth), or critical chloride content, is defined as the chloride concentration at the depth of the reinforcement, which initiates the depassivation of steel in concrete. However, very limited information is available regarding the chloride distributions at the interface with the steel. The main objective of this work is to improve the knowledge and understanding abou...

The corrosion of reinforcements induced by chloride has resulted to be one of the most frequent causes of their premature damage. Most corrosion sensors were designed to monitor corrosion state in concrete, such as Anode-Ladder-System and Corrowatch System, which are widely used to monitor chloride ingress in marine concrete. However, the monitoring principle of these corrosion sensors is based...

The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions....

Editors,—I read with interest the article by Ruttmann, James and Aronson1 concerning haemodilution with hydroxethyl starch and normal saline. However, I disagree with their conclusion that they have shown that haemodilution per se exerted a procoagulant effect in both groups. Instead, I propose that their conclusion should be that they demonstrated that haemodilution with normal saline resulted...

Flocculation with titanium tetrachloride (TiCl(4)) and titanium sulfate (Ti(SO(4))(2)) was investigated in terms of different coagulant doses, pH, turbidity, dissolved organic carbon (DOC), UV-254, colour, zeta potential, particle size and molecular weight distribution. The two coagulants were compared with the commonly used coagulants such as ferric chloride (FeCl(3)) and aluminium sulfate (Al...