The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring ele...

acoustically transparent epoxy, nanocomposites for underwater sonar windows J. Adv. Mater. 41 [3] (2009) 5-17. 1 Carbon nanotube reinforced acoustically transparent epoxy nanocomposites for underwater sonar windows Wei Chen, Shankar Rajaram, Shad Thomas, Steven R. Nutt 1. Materials Science and Chemical Engineering, University of Southern CaliforniaVHE406, 3651 Watt Way, Los Angeles, CA, USA, 90...

Laser materials processing with ultra-short pulses allows very precise and high quality results with a minimum extent of the thermally affected zone. However, with increasing average laser power and repetition rates the so-called heat accumulation effect becomes a considerable issue. The following discussion presents a comprehensive analytical treatment of multi-pulse processing and reveals the...

We present a Finite Element (FE) approach to model the conductivity and strain-sensing capabilities of Carbon Nanotube (CNT) reinforced polymer composites. A periodic Representative Volume Element (RVE) is constructed based on measurable statistical descriptors of the microstructure, and its response is simulated by concurrent electrical and mechanical FE analyses; the scatter of the prediction...

The concept of lightweight design is widely employed for designing and constructing aerospace structures that can sustain extreme loads while also being fuel-efficient. Popular lightweight materials such as aluminum alloy and fiber-reinforced polymers (FRPs) possess outstanding mechanical properties, but their structural integrity requires constant assessment to ensure structural safety. Next-g...

In the present work, multiwalled carbon nanotube (MWNT) reinforced UHMWPE composite films were prepared by electrostatic spraying followed by consolidation. X-ray diffraction and differential scanning calorimetry studies showed a decrease in the crystallinity of UHMWPE due to the nature of the fabrication process as well as addition of MWNT. Tensile test showed an 82% increase in the Young’s mo...

This study focuses on the manufacture of carbon nanotubes using the arc discharge method. Several independent variables were changed, such as the current (80 and 100 A), an atmosphere of open air or argon and the catalyst (no catalyst, Fe or a mixture of Fe/Co,Ni). Only one set of parameters yielded MWNTs, involving Fe as the catalyst and an open air atmosphere. I. INTRODUCTION There has been i...

Liquid crystalline thermosetting epoxy, 4,4'-diglycidyloxy-α-methylstilbene (DOMS) was synthesized and characterized with cross-polarized optical microscopy (POM) and differential scanning calorimetry (DSC). Carbon nanotube (CNT) or graphene reinforced DOMS composites were fabricated by melt blending with sulfanilamide (SAA) as a curing agent. To investigate the thermal degradation behavior, th...