This paper describes a framework to study the initiation and arrest of an interfacial crack, using a combination of experiment and computation. We consider a test configuration widely used in the microelectronic industry: a sample of two substrates bonded by a stack of thin films, with a pre-crack in one of the substrates, perpendicularly impinging upon the films. When the sample is loaded to a...

A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...

A major part of fracture mechanics is concerned with studying the initiation and propagation of fatigue cracks. This typically requires constant monitoring of crack growth during fatigue cycles which necessitates automation of the whole process. If the rate of crack growth can be determined the experimenter can vary externally controlled parameters such as load level, load cycle frequency and s...

We present some recent existence results for the variational model of crack growth in brittle materials proposed by Francfort and Marigo in 1998. These results, obtained in collaboration with Francfort and Toader, cover the case of arbitrary space dimension with a general quasiconvex bulk energy and with prescribed boundary deformations and applied loads.

In this paper, we prove a new existence result for a variational model of crack growth in brittle materials proposed in [15]. We consider the case of n -dimensional finite elasticity, for an arbitrary n ≥ 1 , with a quasiconvex bulk energy and with prescribed boundary deformations and applied loads, both depending on time.

In this study, the pitting type of corrosion growth characteristics, fatigue crack initiation and propagation behavior; axial fatigue tests were carried out on precipitation hardened martensitic Custom 450 steel in the air and 3.5wt% NaCl solution. Using the ratio of the depth to the half-width of the pits; (a/c)= 1.5±0.2 the corrosion pit depth growth law was obtained as a function of stress a...

Centrifugal compressors are a key piece of equipment for modern production. Among the components of the centrifugal compressor, the impeller is a pivotal part as it is used to transform kinetic energy into pressure energy. Blade crack condition monitoring and classification has been broadly investigated in the industrial and academic area. In this research, a pressure pulsation (PP) sensor arra...

In this study, single-edge cracked uniaxial specimens with an initial crack length of 0.1 in or 0.3 in and wedge-shaped sheet specimens with an initial crack length of 0.3 in were tested at a constant displacement rate of 50 in/min under 1000 psi confining pressure. The specimens were made of a highly filled polymeric material, containing 86% by weight of hard particles embedded in a rubbery ma...

The classical, overall objective of fracture mechanics is the determination of the rate of change of the shape of an existing crack. Will it propagate under given loading and environmental conditions, and, if it does propagate, at what rate and into what configuration will it do so? The corresponding computational requirement has been to obtain the fields – displacement, strain, stress, and ene...

Long-term durability is a major obstacle limiting the widespread use of lithium-ion batteries in heavy-duty applications and others demanding extended lifetime. As one of the root causes of the degradation of battery performance, the electrode failure mechanisms are still unknown. In this paper, we reveal the fundamental fracture mechanisms of single-crystal silicon electrodes over extended lit...