OBJECTIVE To compare the polymerization effectiveness of two resin composites cured with a quartz tungsten halogen (QTH) lamp or a light emitting diodes (LED) unit. STUDY DESIGN Filtek Z250 (3M ESPE) and Spectrum TPH (Dentsply DeTrey) resin composites were placed in 9 mm deep and 4 mm wide metallic molds and cured using the QTH light Hilux 200 (Benlioglu) or the LED unit Smartlite IQ (Dentspl...

Refractive index control of benzocyclobutene (BCB 4024-40) is achieved by facilitating different conditions during the thermal curing of BCB film. Refractive index (RI) change of 1.49% is obtained with curing of BCB film using an oven, while the RI change is 0.1% when the BCB is cured using a hotplate. The two different curing methods exhibit a temperature dependent refractive index change of t...

Continuous radiation ovens are of widely used apparatuses in paint cure and coating industries. The most important issue that guarantee the quality of paint curing is suitable thermal condition. Designing of these ovens for curing paint on bodies of complex geometries has become a challenge for many years. In the present study a new designing approach is introduced and advised because of its ac...

Received: 26 July 2011 Accepted: 17 July 2012 Abstract Background and Aim: Lack of appropriate seal is one of the major problems in composite restorations. Properties of the bonding system can play a crucial role in sealing ability of these restorations. The aim of this study was to evaluate the microleakage of class V composite restorations with varying irradiation times for curing dentin bond...

SUMMARY The aim of this study was to assess the influence of light-curing time on the nanohardness (H) and reduced elastic modulus (Er) of components (underlying dentin, hybrid layer, adhesive, and composite) of methacrylate- and silorane-based restorations after 24 hours and six months of storage. Class II slot preparations were carried out in human molars (n=3) and restored with methacrylate ...

PURPOSE The aim of this study was to compare postoperative sensitivity following placement of posterior composite restorations using the fast- or step-curing modes of an LED curing light. MATERIALS AND METHODS Thirty patients participated, with each having two homologous contralateral posterior teeth with Class II carious lesions. One restoration was cured using the fast-curing mode of the LE...

present research involves the complete simulation of pultrusion manufacturing process of glass/polyester composites. for that purpose, the curing process is divided to two liquid and gel-solid phases. the physical characteristics of the resin consist of specific heat, viscosity and coefficient of heat transfer changes with variations of temperature and increasing the degree of curing process (α...

AIM The aim of this study was to measure the temperature increase induced by various light-curing units during photo-polymerization beneath ceramic restorations. METHODS Three light-curing units were used; a high intensity QTH unit Elipar 2500 and two LED units: Translux Power Blue and Excelled 1400. The 15 ceramic specimens (CEREC Blocks) used in this study were of 2.5 mm thickness, 5 mm wid...

PURPOSE The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light ...