In this study, experimental Ti-Ag alloys (5, 10, and 20 mass% Ag) and Ti-Cu alloys (2, 5, and 10 mass% Cu) were made in an argon-arc melting furnace. The alloys were cast into magnesia molds using an argon gas-pressure dental casting machine, and the mechanical properties and microstructures of the castings were investigated. As the concentration of silver or copper in the alloys increased, the...

In this study, different glasses were investigated to improve reusable investments. Borosilicate glass (BSG) powder and soda-lime glass (SLG) powder were prepared by milling broken beakers and microscope slides, respectively, and used in experimental investments (I-BSG, I-SLG) by blending glass powder (10 wt%) with cristobalite (90 wt%). Some properties and casting fits were evaluated with comm...

Previous studies of CAD/CAM-produced sacrificial patterns for removable partial denture frameworks have been documented but to date, no such restorations have been test-fitted to a patient. This paper provides details of the first trial fitting to a patient of an RPD framework, the sacrificial pattern of which was produced by CAD/CAM and RP technologies. A cast of the patient was scanned and th...

The dimensionless Niyama criterion was used to predict the formation of microporosity in nickel-based superalloy casting, which extended the model application from a simple plate casting to complex thin-wall superalloy casting. The physical characteristics of the superalloy were calculated by JMatPro software. The relation between the volume percentage of microporosity and the dimensionless Niy...

The degree of III-CaSO4 to II-CaSO4 transition was estimated on wet specimens, 25 mm in diameter and 50 mm high, prepared from a gypsum-bonded investment for quick casting. After 30 min from mixing the specimens were heated in a 700 degrees C furnace until a specimen temperature of 200 degrees C to 700 degrees C was reached. The estimation was made by measuring mass changes of the specimens bef...

OBJECTIVES As the choice of suprastructure alloy to be combined with titanium for the oral cavity is still a much debated issue, the aim of this study was to investigate the electrochemical interaction of the suprastructure/implant couples under the determined experiment conditions. MATERIAL AND METHODS The potentiodynamic polarization curves and open-circuit potentials (OCP) of four UCLA typ...

There are many situations in which mis-coordinated strategic voting can leave strategic voters worse off than they would have been had they not tried to strategize. We analyse the simplest of such scenarios, in which the set of strategic voters all have the same sincere preferences and all cast the same strategic vote, while all other voters vote sincerely. Most mis-coordinations in this framew...

We propose that voting protocols be judged in part on ballot casting assurance, a property which complements universal verifiability. Some protocols already support ballot casting assurance, though the concept has not received adequate explicit emphasis. Ballot casting assurance captures two well known voting concepts – cast as intended, and recorded as cast – into one end-to-end property: Alic...

This work has been motivated by some issues of process monitoring in casting applications. In die casting, as time passes, material is deposited on the inside wall of the die. This foreign material can cause an unacceptable level of porosity in the output of the casting process. After accumulated material reaches a certain level, some of the output of the casting process no longer meets the spe...