Quantitative studies of dye adsorption by bacteria have been made (Kennedy and Barbaro, 1953; Barbaro and Kennedy, 1954; Kennedy and Woodhour, 1956; Barbaro et al., 1956) in order to measure the degree of gram-positiveness, and to study the influence of several factors on the quantity of dye retained by the microorganisms. No attention has been given, however, to the applicability of the physic...

The magnetic adsorbent nanoparticle was modified using cationic surface active agent. Zinc ferrite nanoparticle and cetyl trimethylammonium bromide were used as an adsorbent and a surface active agent, respectively. Dye removal ability of the surface modified nanoparticle as an adsorbent was investigated. Direct Green 6 (DG6), Direct Red 31 (DR31) and Direct Red 23 (DR23) were used. The charact...

The objective of this study was to examine the effects of adsorbability and number of sulfonate group on solar photocatalytic degradation of mono azo methyl orange (MO) and diazo Reactive Green 19 (RG19) in single and binary dye solutions. The adsorption capacity of MO and RG19 onto the TiO₂ was 16.9 and 26.8 mg/g, respectively, in single dye solution, and reduced to 5.0 and 23.1 mg/g, respecti...

This research presents adsorption potential of surfactant (sodium dodecyl sulphate; SDS) coated magnetite nanoparticles as suitable and efficient adsorbent for the removal of Basic Blue 41 (BB 41), as a cationic dye from textile’s company wastewater. The effects of various experimental parameters (e.g. initial pH of the solution, SDS amount, and ionic strength) on the adsorption efficiency of B...

At the present time there is no satisfactory procedure for estimating the degree of gram positivity although the need for a quantitative method is widely recognized. Recently Kennedy and Barbaro (1953) reported an accurate and reproducible method for determining quantitatively the adsorption of crytl violet by bacteria. In addition, the effect of the species and strain of the organism used, the...

We study the mechanism of surface adsorption of organic dyes on graphene, and successive exfoliation in water of these dye-functionalized graphene sheets. A systematic, comparative study is performed on pyrenes functionalized with an increasing number of sulfonic groups. By combining experimental and modeling investigations, we find an unambiguous correlation between the graphene-dye interactio...

Carbon based composites have good capability for elimination of colored pollutants. In this work, a multi-walled carbon nanotube-graphite Composite (MW-g-C) was prepared using a sol gel method. The N2 adsorption/desorption curves, scanning electron microscopy and zeta potential were used for characterization of MW-g-C. The adsorption characteristics of MW-g-C were studied using Basic Blue 41 (B...

Analyses were carried out for adsorption of a reactive dye RB5 onto chitin and chitosan under static and dynamic conditions in an air-lift reactor. Assays were conducted for the effect of the type of sorbent and its content in the reactor on adsorption capacity of sorbents examined. The sorbent’s concentration under static conditions and in the reactor reached 5 mg d.m./dm3. In all experimental...

Na-bentonite was prepared and tested as an adsorbent for a dye (Reactive Blue2) removal from aqueous solution. The effect of various experimental parameters was investigated using a batch adsorption technique. In this manner, initial dye concentration, pH of the initial dye solution, temperature and time contact effects upon dye adsorption on Na–bentonite having a structural formula of (Si7.86 ...