The performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. Therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. One common method of improving the performance of asphaltic mixtures is using different types of ...

Macroscopic mechanical properties of human skin in vivo cannot be considered independent of adjacent subcutaneous white adipose tissue (sWAT). The layered system skin/sWAT appears as the hierarchical structural composite in which single layers behave as fiber-reinforced structures. Effective macroscopic mechanical properties of such composites are mainly determined either by the properties of t...

improvement of the physical and mechanical properties of paper in the discussion of the application is very important. in order to fulfill this purpose, conventional processing techniques such as filtering and addition of long fibers and other chemicals such as additive resistors for dry and wet the pulp have been used. one of the methods to improve the physical and mechanical properties of pap...

aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. by adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. in this work, polyalkylene glycol (pag) aqueous solution was used as th...

Background and Objectives: Kefiran (Kef) is a water-soluble polysaccharide that can form transparent film however, it is brittle. Therefore, in order to improve the mechanical properties of kefiran film, a mixture with other polymers can be offered. The expansion of mixed systems can propose kefiran and polyvinyl alcohol (PVOH) as a new composite film. Materials and Methods: Solutions of 20 gr...

abstract: in this study, al 2 o 3 –sic nanocomposites have been fabricated by mixing of alumina powder containing 0.05% weight magnesium oxide and silicon carbide nano powders, followed by hot pressing at 1650 0 c. the mechanical properties of al 2 o 3 -sic nanocomposites containing different volume fraction (2.5, 5, 7.5, 10 and 15%) of nano scale sic particles were investigated and compared wi...

there is a worldwide interest in using fibers of different types in concrete mixtures. in this regard, as the use of pet fibers has gradually increased during the last decade, this study aims to investigate the effects of pet fibers on the mechanical properties of hardened concrete and the workability of fresh concrete. to this end, different contents of pet fibers (pc= %0, %0.5, %1 and %1.5) a...

in the current study an experimental/statistical approach addressing key mechanical properties (compressive, tensile and flexural strength) and impact resistance of such new fibers with inclusion of different volume of polyphenylene sulfide (pps) fibers has been carried out on 288 specimens. results from this study revealed that compressive, tensile and flexural strength exhibit a good fit with...

in this research, al-ni particle composite strips are formed by accumulative roll bonding (arb) process using al strips and ni powder. the rule of arb cycles and volume percentage (vol%) of ni powder on the microstructure, wear resistance and mechanical properties of the formed composites are investigated. according to the tensile test results, the yield stress and tensile strengths of the al -...

background: characterizing the mechanical properties of brain tissue is deemed important for developing a comprehensive knowledge of the mechanisms underlying brain diseases. mechanical properties of very soft tissues, such as brain until recently have been attracted the attention of researchers because these tissues do not tolerate mechanical loads. the mechanical properties of brain tissue, h...