Removal of uranium [U(VI)] from aqueous solutions with humic acid-immobilized zirconium-pillared clay (HA-Zr-PILC) was investigated using a batch adsorption technique. The adsorbent was characterized using XRD, FTIR, SEM, TG/DTG, surface area analyzer and potentiometric titration. The effects of pH, contact time, initial concentration, adsorbent dose, and adsorption isotherm on the removal proc...

In this study adsorption of arsenic (As) onto TiO2 nanoparticles and the facilitated transport of As into carp (Cyprinus carpio) by TiO2 nanoparticles was examined. Adsorption kinetics and adsorption isotherm were conducted by adding As(V) to TiO2 suspensions. Facilitated transport of As by TiO2 nanoparticles was assessed by accumulation tests exposing carp to As(V) contaminated water in the pr...

hydroxyapatite nanocrystals were synthesized by sol-gel combustion method for the sorption ofhg(ii) ions from aqueous solutions. the effects of varying parameters such as ph, temperature, initialmetal concentration, and contact time on the adsorption process were examined. adsorptionequilibrium was established in 360 minutes and the maximum adsorption of hg(ii) on thehydroxyapatite was observed...

in this research, chitosan was used for the removal of cr (vi) ions from aqueous solution. the effect of parameters like solution ph, initial cr (vi) concentration, agitation time, amount of adsorbent and agitation speed on the adsorption process was studied. the experimental equilibrium data were analyzed by using various models such as langmuir and freundlich. freundlich isotherm model fitted...

Quite some bones of cows and pigs are discharged from home and restaurant industry as food wastes after cooking by boiling. This study conducted adsorption experiment of heavy metals using waste bones as an absorbent for recycling the waste bone and evaluated its feasibility. Sintered cattle bone (SCB) was manufactured in powder form after sintering at 550 ̊C 600 ̊C and pulverizing, and crystal s...

Sorption of pyrethroid insecticides to solid materials will typically dominate the fate and transport of these hydrophobic compounds in aquatic environments. Batch reactor isotherm experiments were performed with bifenthrin and λ-cyhalothrin with suspended material and bed sediment collected from the Sacramento River, California, USA. These batch reactor experiments were performed with low spik...

Equilibrium models used for predicting phosphorus (P) loss from a site often use the Langmuir strength of P bonding, KL and the P sorption maximum, Smax, or the Freundlich adsorption coefficient, KF, obtained from traditional isotherms, as model input parameters. The overall objective of the study was to develop a protocol to allow estimation of isotherm parameters for soils using simple extrac...

Rice husk ash (RHA), an agricultural waste, was used as biosorbent for the removal of Iron(II) and Manganese(II) ions from aqueous solutions. The structural and morphological characteristics of RHA and its elemental compositions before and after adsorption of Fe(II) and Mn(II) were determined by scanning electron microscopic (SEM) and X-ray fluorescence (XRF) analyses. Batch experiments were ca...

deficiency of water resources is one of the major challenges at the global scale and also in iran. the existence water resources of oceans and seas such as the caspian sea and persian gulf in the north and southern parts of iran respectively, can be considered as the alternative to dominate the future problem. this study is processed absorption of nacl based-on natural zeolite and perlite. in o...

In this study adsorption of 1-chloro-4-nitrobenzene (CNB) from aqueous solutions onto multi-walled carbon nanotubes (MWCNTs) was surveyed. The effect of some key parameters such as pH (2-10), carbon nanotubes dosage (0.02-0.1 mg/250mL), CNB concentration (2- 16 mg/L), and temperature (20,30,40,50°C) were investigated. The results showed that, the variation of initial pH and CNB concentration ex...