In order to determine the matching relationship of polymer molecular weight and reservoir permeability in ASP (alkaline/surfactant/polymer) flooding, a number of core flooding experiments with different polymer molecular weights are performed. Two types of curves for the relationship between the pressure difference and the injection pore volume multiples are obtained. One describes the characte...

This technical note presents the results of a field investigation into pile aging in soft clay which was conducted over a period of ten years. Static load tests were conducted after the excess pore pressure generated by the installation of 6 m long driven concrete piles were fully equalised. These tests allowed the time-capacity aging profile to be established. A normalised capacity-time trend ...

Microscopic oil displacement of water flooding and sweep efficiency of continuous gas injection could be improved by water alternating gas (WAG) injection. The WAG injection process aims to squeeze more oil out of the reservoirs; in this method, water and gas are alternatively injected into the reservoir. Also, availability of hydrocarbon or CO2 gases in the field makes it attractive for gas-ba...

Abstract Due to an increase in axle loads, the development of excess pore water pressure and settlement a railway track foundation fine-grained subgrade soil can be observed. A thorough understanding mechanism is essential for settlements design potential ground improvement. In this paper, three dimensional numerical study presented, which investigates effects loads trains on both settlement. S...

Equation of state and structure of hard-sphere fluids confined in a cylindrical hard pore were investigated at the vicinity of fluid-solid transition via molecular dynamics simulation. By constructing artificial closed-packed structures in a cylindrical pore, we explicitly capture the fluid-solid phase transition and coexistence for the pore diameters from 2.17sigma to 15sigma. There exist some...

1.1 Abstract Poromechanics offers a consistent theoretical framework for describing the mechanical response of porous solids. When dealing with fully saturated nanoporous materials, which exhibit pores of the nanometer size, additional effects due to adsorption and confinement of the fluid molecules in the smallest pores must be accounted for. From the mechanical point of view, these phenomena ...

Purpose of this study is to numerically investigate combustion within a porous channel, which has three layers with different pore densities. Non-premixed inside the channel modelled thermal non-equilibrium energy equations. Flow and chemistry are decoupled tabulated using flamelets, thereby reducing computational cost. GRI 3.0 mechanism used account for methane/air combustion. Simulations perf...

A new SUZ-4 zeolite membrane with tetraethlyammonium hydroxide as the template was fabricated on mullite tube via hydrothermal sol-gel synthesis in a rotating autoclave reactor. The suitable synthesis condition was SiO2:Al2O3 ratio of 21.2 for 4 days at 155 °C crystallization under autogenous pressure. The obtained SUZ-4 possessed a high BET surface area of 396.4 m/g, total pore volume at 2.611...