Abstract: A new reinforced SFRFLC (abbr. steel fiber reinforced full-lightweight concrete) superposed beam was proposed to sufficiently utilize the good peculiarities of ordinary concrete in compression and SFRFLC in tension, and reduce its self-weight. Experimental study was carried out on the flexural behaviors of reinforced SFRFLC superposed beams compared with reinforced concrete beams and ...

Three methods for analyzing azimuthal anisotropy from cross-dipole logs are applied to data from the Powder River Basin in Wyoming. These techniques are based on the phenomena of flexural wave splitting in anisotropic materials and are analogous to the techniques used for VSP data processing. The four-component cross-dipole logging data obtained with a Schumberger tool from a vertically-fractur...

Reported is a study evaluating the potential of esterified tannins as plastic additives in poly(lactic acid) (PLA). Tannin esterification using anhydrides was investigated as a route to synthesize tannin esters possessing varying ester chain length and degree of substitution (DS). Esterification decreased the tannin UV absorbance, predominately in the UVB region. However, tannin materials with ...

This study proposed a numerical procedure to simulate the deformation behaviors of the uniaxial compression test of single gabion and of the lateral loading test of full scale gabion retaining wall. The validity of the numerical procedures is verified by the comparison of the measurements with the simulations of deformation behavior. In addition, two evaluation equations which are capable of es...

The aim of the study was to investigate the flexural and impact strength of 3 commercially available denture base resins after reinforcing them with single walled carbon nanotubes (SWCNT’S). Each acrylic resin was first solubilised in Tetrahydrofuran (THF) and then carbon nanotubes were added in different percentages respectively. A total of 50 specimens were made from each material (Eclipse, T...

Existing underground pipe jacking methods use a reinforcing rod in a steel tube to obtain structural stiffness. However, some problems such as inconvenience of works and expensive materials resulted from limited working space and reinforcing works are existed. To resolve these problems, a new pipe jacking method, namely PST (Prestressed Segment Tunnel) method, was developed which used joint to ...

Microtubules are long, proteinaceous filaments that perform structural functions in eukaryotic cells by defining cellular shape and serving as tracks for intracellular motor proteins. We report the first accurate measurements of the flexural rigidity of microtubules. By analyzing the thermally driven fluctuations in their shape, we estimated the mean flexural rigidity of taxol-stabilized microt...

This present study investigated the effects of the addition of hydroxyapatite (HA) on the flexural strength and microstructure of conventional GIC, and its effect on the cement's initial flexural strength at different storage conditions. Specimens were fabricated by mixing HA in whisker or granule form into commercially prepared GIC, and these were subjected to a three-point bending test and SE...

The aim of the present study was to evaluate the effect of solutions, times of storage and reinforcement with fiber on the flexural strength of different composite materials. Nanofill and nanohybrid composite materials with and without fiber, a glass fiber and polyethylene fiber, were tested in the present study. 72 specimens (25×2×2 mm3) were prepared as following six groups; Group ECME: everS...

. AbstrAct Objective. In clinical practice, core material can be exposed after adjustments, which may result in loss of ceramic glaze. The objective of this study is to evaluate the effect of surface roughness on the flexural strength and fracture toughness of In-Ceram zirconia core material. Materials and methods. Forty In-Ceram zirconia specimens were prepared and divided into two main groups...