in this paper, the performance of a natural gas hcci engine is studied through a thermodynamic model including detailed chemical kinetics. it is shown that as hydroxyl radical has important effects on natural gas combustion, it is possible to quantify soc with hydroxyl concentration variations. meanwhile the influence of using formaldehyde as an additive on the engine characteristics has been i...

due to climate changes in recent years, in order to attain comfort and convenience, demands for heating, ventilating, and air conditioning (hvac) systems have been increased around the world, which has led to increases in emissions and power. desiccant cooling systems (dcss) are designed and built to reduce moisture and power consumption, create comfortable conditions for people in a building, ...

The simultaneous removal of SO2/NO2 by limestone slurry was studied in a gas-liquid bubbling reactor. Experiments were carried out to find the effect of various operating parameters such as inlet concentration of SO2 and NO2, reaction temperature, O2 content in the flue gas and additive on the SO2 and NO2 removal efficiencies. SO2 removal efficiency decreased with inlet NO2 concentration, react...

a mixed solar dryer with a specific mechanism to vary the tilted angle of collector, is utilized to fulfill all tests. the efficiency of the dryers is low because of various reasons such as heat loss of air in an open flow circuit. getting air back toward the air inlet of dryer can increase the efficiency of dryer and decrease drying process period. a new mechanism considered for dryer which co...

Airborne measurements of hydrogen peroxide and its partitioning between the aqueous and gas phases were conducted uring studies of wintertime orographic clouds at temperatures ranging between -9 ø and -24øC. A subset of the derived values of the H202 Henry's law coefficient, based on measurement of gas-phase H202 and the physical properties of the cloud, were found to agree with laboratory meas...

The catalytic combustion of methane/air mixtures is investigated experimentally and numerically at gas turbine relevant conditions (inlet temperatures up to 873 K, pressures up to 15 bar and spatial velocities up to 3 × 106 h−1). Experiments are performed in a sub-scale test rig, consisting of a metallic honeycomb structure with alternately coated (Pd-based catalyst) channels. Simulations are c...

Accurate prediction of erosion thickness is essential for pipe engineering. The objective of the present paper is to study the temperature distribution in an eroded bend pipe and find a new method to predict the erosion reduced thickness. Computational fluid dynamic (CFD) simulations with FLUENT software are carried out to investigate the temperature field. And effects of oil inlet rate, oil in...

The multi-inlet air-cooled photovoltaic/thermal (PV/T) technology not only avoids the poor heat transfer conditions of single-inlet PV/T air collectors but also reduces photovoltaic (PV) peak temperature and improves solar energy utilization. Since use no more than three inlets, increase in thermal efficiency is significantly effective. Therefore, a numerical analysis an collector with two side...

During hot seasons the inlet temperature of Nitrogen increases, as a result compressor consumes more power for compressing a specific mass ratio of fluid and consequently total energy consumption of the compressor increases as well. In this research, a three stage centrifugal compressor with intercooler was modeled thermodynamically in order to decreases the energy consumption of the compressor...

Drying of green peas in a Fluidized Bed Dryer (FBD) with inert particle, heated by combined sources of hot air and InfraRed (IR) radiation, has been experimentally and theoretically studied. For this purpose, an experimental set up was constructed. This setup was composed of a cylindrical bed dryer containing some inert particles which are fluidized by hot air. Some infrar...