Currently, marine protein byproducts are mainly hydrolyzed and prepared for applications that depend on their physiological activity. Such uses require strict removal of heavy metal ions from the material. In this work, a green approach was proposed using peanut shells as adsorbent to remove Pb(II) from solutions containing amino acid and sodium chloride. The effects of amino acids and sodium c...

Waste materials with no further treatment such as orange barks from commercial oranges may act as adsorbent for the removal of Pb. Batch kinetic and equilibrium experiments were conducted to study the effects of contact time, initial pH, adsorbent dose and initial concentration of lead. The results show that the equilibrium was achieved less than 30 min of contact time. Three adsorption isother...

The present work describes the synthesis of copper oxide nanoparticles (CuONPs) via a solution process with the aim of applying the nano-adsorbent for the reduction of methylene blue (MB) dye in alkaline media. These NPs were characterized via Field emission scanning electron microscopy (FE-SEM), X-ray diffraction, high-resolution Transmission electron microscopy (TEM), and ultra violet UV-visi...

This research determined the adsorption performance of Florisil® impregnated with trihexyl(tetradecyl)phosphonium chloride (Cyphos IL-101) in the process of Cs+ removal from aqueous solutions. The obtained Florisil® impregnated with the studied ionic liquid was characterized through energy dispersive X-ray analysis and Fourier transform infrared spectroscopy in order to verify that the impregna...

the applicability of fe3o4 nanoparticles (fe3o4nps) for removing alizarin and purpurin from aqueous solutions has been reported. the influence of nanoparticle dosage, ph of the sample solution, individual dye concentration, contact time between the sample and the adsorbent, temperature, and ionic strength of the sample solution were studied by performing a batch adsorption technique. the maximu...

Reaction of NiCl2·6H2O, D-camphoric acid (D-H2cam), and N,N′-bis(pyraz-2-yl)piperazine (bpzpip) in pure water at 150 ◦C afforded a novel nickel(II) coordination layer, [Ni4(D-cam)2(D-Hcam)4(bpzpip)4(H2O)2] (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis reveals that 1 adopts a six-connected two-dimensional (2D) chiral layer structure with 36-hxl topology. Dye ...

The adsorptive capability of superheated steam activated biochar (SSAB) produced from Colocasia esculenta was investigated for removal of Cu(2+), Fe(2+) and As(5+) from simulated coal mine wastewater. SSAB was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analyser. Adsorption isotherm indicated monolayer adsorption which fitted...

The adsorption studies of phenol from aqueous solution on allium sativum peel have been studied in the range of 50-250 mg/L initial phenol concentration .The study was carried out as function of contact time, pH, initial phenol concentration,allium sativum Linn peel dosage and temperature. The experiment demonstrated the maximum phenol was obtained at in pH of 2 and it takes 6h to attain equili...

Adsorption of Nickel(II) ion onto Activated Carbon prepared from Delonix regia pods activated with Zinc chloride (DRZAC) under various experimental conditions were studied. Batch mode adsorption experiments were conducted. The characteristics of the DRZAC were determined by SEM, XRD, FTIR, BET analysis and pHZPC. The maximum removal efficiency of Ni(II) ion is 85% at pH 6. Under the chosen cond...

The study presented in this article investigated the removal of copper ions from aqueous solutions by a synthetic hydrogel-forming adsorbent polymer based on sodium alginate (SA) and hydroxy apatite (HA) nanoparticles. The effect of adding Zeolite on the adsorption performance of this hydrogel was also investigated, and the optimum amount of Zeolite was determined by changing its quantity. The ...