PURPOSE Over the last few years, particular attention has been paid to the implant surface and its influence on the formation and maintenance of surrounding bone. The surface of Osseotite implants (Implant Innovations) is produced by a process of thermal etching, which produces a surface with an average roughness that is twice that of machined implants produced by the same manufacturer. In addi...

This study investigated the aerobic biodegradation of methyl tertiary-butyl ether (MTBE) by a microbial consortium in a continuous up-flow packed-bed biofilm reactor using tezontle stone particles as a supporting material for the biofilm. Although MTBE is toxic for microbial communities, the microbial consortium used here was able to resist MTBE loading rates up to 128.3 mg L-1 h-1, with remova...

When compact bone is subjected to bending loads, interstitial fluid in the bone matrix flows away from regions of high compressive stress. The amount of interstitial fluid flow is strongly influenced by the loading rate in a dose-dependent fashion. We hypothesize that interstitial fluid flow affects bone formation, and we tested this hypothesis indirectly by measuring the effect of different lo...

Systematic review conclusion: Implant location, type of restoration, and implant number do have an influence on the estimated implant loss rate. In general, conventional loading tended to result in fewer implant losses. However, the implant loss rate for fixed prostheses in maxilla and mandible did not significantly differ concerning immediate and conventional loading. It has to be noted, thoug...

Runners often experience over-use injuries. Ground reaction force (GRFs) patterns have been associated with these over-use injuries; however, it is not solely the magnitude of GRFs, but also the rate at which they are applied that lead to lower extremity injury. Many recreational runners will use over-the-counter insoles as a method of treating or preventing injury. Therefore, the purpose of th...

As a strain rate-dependent material, bone has a different mechanical response to various loads. Our aim was to evaluate the effect of water and different loading/unloading rates on the nanomechanical properties of canine femur cortical bone. Six cross-sections were cut from the diaphysis of six dog femurs and were nanoindented in their cortical area. Both dry and wet conditions were taken into ...

During the recent decades, the design and construction of underground spaces into rock salt have been particularly regarded for storing petroleum fluids, natural gas, and compressed air energy, and also for disposing nuclear and chemical wastes. The rock salt hosting such spaces will be subjected to various types of monotonic/cyclic, short-term/long-term stresses during the construction and/or ...

Increased mechanical loading of bone with the rat tibia four-point bending device stimulates bone formation on periosteal and endocortical surfaces. With long-term loading cell activity diminishes, and it has been reported that early gains in bone size may reverse. This study examined the time course for bone cellular and structural response after 6, 12, and 18 wk of loading at 1,200-1, 700 mic...

Co-digestion of cattle slurry and maize has been shown to have benefits for both, improving the biogas yield of the slurry and stability of digestion of the maize. The effect of increasing the total loading rate from 3 to 6 g VS l(-1) day(-1) on the co-digestion of cattle slurry and maize, mixed at equal volatile solids volumes, was investigated in laboratory-scale continuously stirred digester...

Advanced high strength steels (AHSS) have recently attracted great attention because of their superior mechanical properties. A modern group of these steels, known as twinning induced plasticity (TWIP) steels, shows a unique combination of strength and ductility even at high rates of strain. In order to examine the functionality of such steels in dynamic loading conditions, their mechanical beh...