نتایج جستجو برای: managment of joint properties
تعداد نتایج: 21206889 فیلتر نتایج به سال:
The fine grain structure of friction-stir welded aluminum alloys is unstable during post weld heat treatment and some grains abnormally grown. In this study, the sequence of abnormal grain growth during T6 heat treatment of Al-7075 friction-stir weld and its effect on mechanical properties of the weld was studied. The results showed that heat treatment in 510 ˚C resulted in drastic grain growth...
In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that ...
In this research, microstructure and mechanical properties of AISI316 to AISI430 dissimilar joint were investigated. For this purpose, GTAW process using ER316L and ER2209 filler metals with diameter of 2.4 mm was used. The microstructure and fracture surface of the welded samples were characterized by optical microscopy and scanning electron microscopy. Also the mechanical properties of the we...
introduction: health tourism is an organized travel we make from where we live to another place to keep, regain, and improve physical and mental health. it can be also a national strategy to improve national income and some believe that it can be an integral part of national security. the present study is an attempt to determine the relationship between observance of the standards of internatio...
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
Glass fiber reinforced gypsum composites are new building materials that have been used in covering interior walls. Reinforcement by means of woven fabrics as a three dimensional material is an alternative to the use of short fibers. The application of appropriate fabrics can improve mechanical properties of gypsum composites. The aim of this research article is to investigate the effect of the...
وظیفه اصلی یک سامانه مدیریت نبرد تلفیق داده سنسورهای مختلف می باشد. یکی از مشهورترین مدل های تلفیق داده در این سامانه (joint director of laboratories(jdl)) نام دارد. ارزیابی تهدید یکی از حیاتی ترین مراحل بخش تلفیق داده در مدل مذکور است. از پرکاربردترین روش های کلاسیک و هوشمند موجود برای ارزیابی تهدید در سیستم های تلفیق داده می توان به تئوری دمپستر- شافر و مجموعه های فازی اشاره نمود. عیب هر دو ر...
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید