in this research, the effect of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin (uf) was investigated. the prepared gluf resin was mixed mechanically with the 0.5, 1 and 1.5% nanoclay for 5 min at room temperature. the physicochemical properties of the prepared resins were measured according to standard methods. also, the thermal and structural changes i...

The objective of this preliminary study was to partially replace phenol in the synthesis of phenol-formaldehyde resin with feather protein. Feather protein–based resins, which contained one part feather protein and two parts phenol, were formulated under the conditions of two feather protein hydrolysis methods (with and without presence of phenol during hydrolysis), two formaldehyde/phenol mola...

condensation reaction of urea, casein and formaldehyde in the presence of varying proportion of resorcinol under alkaline condition. All the prepared resins were characterized by free-formaldehyde content, free-phenol content, viscosity measurements and infrared spectroscopy (IR). The resin samples were cured isothermally at 120oC using two different curing agents, p-toluene sulphonic acid (PTS...

This paper describes the carbonization behavior of phenol-formaldehyde resin (PF) blended in the presence of simple organic substances of m-phthalic acid (PA), trimesic acid (TMA) and phloroglucinol (PG). The weight loss and heat flow were monitored in order to study their carbonization behavior by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC), respectively. These ...

ABSTRAKPanel kayu merupakan produk yang terbuat dari bahan direkatkan dengan menggunakan resin, perekat digunakan dalam produksi lapis resin urea-formaldehid (UF). Resin UF adalah thermosetting urea dan formaldehid akan mengeras jika dipanaskan dapat dicetak ulang. Pada penelitian ini, pembuatan baku Urea Formaldehyde Concentrate (UFC). Tujuan ini mempelajari pengaruh perubahan sifat kinerja UF...

a chelating resin is prepared by condensation polymerization of aniline with formaldehyde andcharacterized by ft-ir, elemental analysis and studied for the preconcentration and determination of traceplatinum ion from environmental water sample using inductively coupled plasma-atomic emission spectroscopy(icp-aes). the optimum ph value for sorption of the metal ions was 5. the maximum adsorption...

The artificial neural network (ANN) was used to predict the modulus of rupture (MOR) laminated wood products adhered by melamine/urea formaldehyde (MUF) resin with different molar ratios combined weight protein adhesive resulting from alkaline treatment (NaOH) soybean oil meal MUF pressed at temperatures according central composite design (CCD). After making boards and performing mechanical tes...

In this study, nanocrystalline cellulose (NCC) was used for increasing the bonding strength of urea-formaldehyde (UF) resin adhesive, with a reduction of formaldehyde (HCHO) emissions. The surface of NCC was modified by 3-aminpropyltriethoxysilane (APTES) and 3-methacryloxypropyltrimethoxysilane (MPS) for the lack of compatibility with UF resin adhesive. The modified NCC was characterized by X-...