Eu ions-doped cubic mesoporous silica thin films with a thickness of about 205 nm were prepared on silicon and glass substrates using triblock copolymer as a structure-directing agent using sol–gel spin-coating and calcination processes. X-ray diffraction and transmission electron microscopy analysis show that the mesoporous silica thin films have a highly ordered body-centered cubic mesoporous...

Eu3+ ions-doped cubic mesoporous silica thin films with a thickness of about 205 nm were prepared on silicon and glass substrates using triblock copolymer as a structure-directing agent using sol-gel spin-coating and calcination processes. X-ray diffraction and transmission electron microscopy analysis show that the mesoporous silica thin films have a highly ordered body-centered cubic mesoporo...

Recently interest in adsorption cooling systems has increased due to their capability to utilise low grade heat sources and environmentally friendly refrigerants. Currently, most of the commercially available adsorption cooling systems utilise granular packed adsorbent beds. Enhancing the heat transfer process inside the adsorbent bed will improve the overall efficiency of the adsorption system...

Populus alba is fast and auto- growing tree which profoundly accessible in around the world. The usage of the wastes of this tree would be admirable from environmental and solid waste management point of view. Thus, herein, this data set presents a facile method for providing an adsorbent from wastes of P. alba tree. The prepared adsorbent was modified by the cationic surfactant of (C16H33)N(CH...

The hydride gas of phosphine (PH3) is commonly used for semiconductor and optoelectronic industries. The local scrubbers must immediately abate it because of its high toxicity. In this study, copper (Cu) loaded on the sol-gel-derived gamma-alumina (Al2O3) adsorbents are prepared and tested to investigate the possibility of PH3 removal and sorbent regeneration. Test results showed that during th...

mesoporous  mgo  microstructures  were  synthesized  using magnesium  acetate  tetrahydrate,  ammonium  oxalate  monohydrate and  pluronic  f127  via  heating  at  40  °c  for  24  h  and  subsequent calcination. the mesoporous structure of magnesium oxide with the specific  surface  area  of  47m2/g,  pore  volume  0.30  cm3/g  and  the average pore size 24 nm is produced. according to xrd stu...

An investigation was conducted on the adsorption of oxymatrine (OMT) on a spherical cellulose adsorbent embedded with wattle bark tannin. The results showed that the adsorption of the OMT on the adsorbent was solution pH dependent and the adsorption process followed the Freundlich adsorption isotherm. The adsorption kinetics of the OMT on the adsorbent could be well described by the pseudo-seco...

In the present work, adsorption of carcinogenic pentavalent arsenic (As(V)) from an aqueous solution was studied using mesoporous cerium oxide (MCO). The MCO synthesized in precipitation process and confirmed by FT-IR, SEM-EDX, XRD, BET instrumental techniques. Batch showed that 95% As(V) removed optimum conditions 0.60 g/L adsorbent dose, 10 mg/L initial concentration, time 30 min, pH 3. Pseud...

Mesoporous silica molecular sieves are a kind of unique catalyst support due to their large pore size and high surface area. Several methods have been developed to immobilize heteropolyacids (HPAs) inside the channels of these mesoporous silicas. The mesoporous silica-supported HPA materials have been widely used as recyclable catalysts in heterogeneous systems. They have shown high catalytic a...

Highly ordered mesoporous graphitic carbon was synthesized from a simple surfactant-assisted nanocasting route, in which ordered mesoporous silica SBA-15 maintaining its triblock copolymer surfactant was used as a hard template and natural soybean oil (SBO) as a carbon precursor. The hydrophobic domain of the surfactant assisted SBO in infiltration into the template's mesoporous channels. After...