INTRODUCTION This report presents the results of two trials conducted with the Blast Furnace Granular Coal Injection System at Bethlehem Steel Corporation's Bums Harbor Plant. The trials were conducted using granulated and pulverized high volatile coal from Colorado. The first trial was conducted to quantify the effect that a high volatile western coal, Colorado Oxbow, has on the blast furnace ...

The difficulty in measuring load temperatures inside reheating gas furnaces may be circumvented by appropriate use of on-line numerical models. In this article we describe a model of pusher furnaces, used to reheat steel slabs. The model uses thermocouple measurements at fixed positions inside the furnace to calculate the temperature of the combustion products, and takes into account radiative ...

This paper describes the adsorption of two organic (acetic and citric) acids on the blast furnace sludge, a representative by-product of the steelmaking industry. By PIXE, XRD, BET and SEM methods, it was shown that blast furnace sludge is a complex heterogeneous material with a specific surface area of s = 31.46 m g, composed mainly of amorphous phase (w = 76.2 %), calcite (w = 9.9 %), magneti...

Blast furnace slag is a key large-tonnage waste product of metallurgical production, which considered to be promising alternative material in construction. In order determine the scope potential use as marketable product, it necessary study its structure and composition, determined by means modern analytical instrumental methods. This paper analyzes application Fourier transform infrared spectr...

This research was conducted to determine the effect of addition Titanium (Ti) and sintering temperature variation on MMC CuC alloys as reinforcing elements. The process this uses powder metallurgical method with an alloying technique in Mechanical Alloying using a Planetary Ball Mill (PBM) machine speed 600 rpm for 2 hours, ratio ball mill is 10:1. compacting carried out dies 11 mm diameter pre...

Mathematical model for the integrated thermal apparatus was developed. It consists of program modules from which individual furnace model can be generated. For the model generation elementary balance method was used. Generation of the individual model includes model formulation and parameters determination. Model formulation is based on first principles, heuristics and empirical results. Parame...

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

OBJECTIVES Little has been known about the risk of cancer associated with occupational exposure to manganese. The objective of this study was therefore to examine the associations between duration of specific work and cancer incidence among employees in four Norwegian ferromanganese and silicomanganese producing plants. METHODS Among men first employed in 1933-91 and with at least 6 months in...

Electric arc furnace dust (EAFD) is generated in considerable amounts by the electric arc steelmaking process. During melting in an electric arc furnace, certain elements volatilize, and form fine dusts after cooling. The EAFD is collected in a baghouse and amounts to approximately 1–2 wt% of the steel produced.1) In China, about 800 million tons of steel was produced in 2015 with more than 9 w...

B. Gajdzik, The Silesian University of Technology, Faculty of Materials Science and Metallurgy, Katowice, Poland Before metallurgical enterprises started implementation of marketing activities they had to go through restructuring processes which included all areas of their market activities. Privatised metallurgical enterprises after economic transformation gradually implemented marketing to th...