The present paper shows the results of nanocomposite polymer electrolytes (SPEs) montmorillonite (MMT; Na+SYN-1) and gellan gum obtained by solution casting method. membrane samples were characterized ATR-FTIR, time-domain nuclear magnetic resonance (TD-NMR), scanning electron microscopy (SEM). Then, two chosen applied in small electrochromic devices (ECDs). ATR-FTIR revealed shifts bands aceta...

In this present report, luminescent ordered multilayer thin films (OMFs) based on oppositely-charged inorganic nanosheets and the different oppositely-charged chromophores were fabricated via layer-by-layer assembly method. Exfoliated layered double hydroxides (LDHs) and montmorillonite (MMT) nanosheets with opposite charges can be expected to provide a pseudo electronic microenvironment (PEM) ...

The ability of commercial nanofillers Nanofil, Cloisite and by own way prepared MMT/ODA for PE and PP matrix was evaluated. Different types of mentioned type of nanofillers were added into polyethylene (PE) and polypropylene (PP) matrix in various concentrations. The amount of clays was calculated as 3 and 5 wt% to the weight of PE/PP. The PE/PP and nanofillers were mixed on a one screw KO Knea...

The present work aims to study the adsorption behavior and dynamical properties of CH4 in clay slit pore with or without cation exchange structures at sizes of 1.0 nm–4.0 nm using grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) methods. The adsorption isotherms of CH4 have been investigated by GCMC simulations at different temperatures and various pore sizes. In the montmorilloni...

Exfoliation through an ionic exchange reaction of layered silicate clays, including synthetic fluorinated mica (Mica) and natural montmorillonite (MMT), were achieved by using polyvalent amine salts as the intercalating agents. The requisite polyamine was synthesized from the epoxy/amine coupling reaction, involving a trifunctional poly(oxypropylene)-triamine (ca. 440 g/mol Mw) and diglycidyl e...

Supercritical carbon dioxide (scCO2) treatments of a montmorillonite (MMT) intercalated with ammonium cations bearing two long hydrocarbon tails (organo-modified MMT, OMMT) led to OMMT exfoliation, with loss of the long-range order in the packing of the hydrocarbon tails and maintenance of the long-range order in the clay layers. The intercalated and the derived exfoliated OMMT have been deeply...

Colloidal suspensions of plate-like particles undergo a variety of phase transitions. The predicted isotropic/nematic transition is often pre-empted by a sol/gel transition, especially in suspensions of the most commonly used natural swelling clay montmorillonite (MMT). A number of factors, including charge interactions, flexibility and salt concentration, may contribute to this competition. In...

Polymer layered silicate (PLS) nanocomposites have been prepared with diglycidyl ether of bisphenol-A (DGEBA) epoxy resin as the matrix and organically modified montmorillonite (MMT) as the clay nanofiller. Resin-clay mixtures with different clay contents (zero, two, five and 10 wt%) were cured, both isothermally and non-isothermally, using a poly(ethyleneimine) hyperbranched polymer (HBP), the...

Combining a nanocomposite technique and the electrospinning process, a robust dual-porosity scaffold structure was developed for a facile transport of metabolic nutrients and wastes through the nano-sized pores and for the cell implantation and blood vessel invasion through the micro-sized pores. The montmorillonite (MMT) nano-sized platelets were incorporated into poly(L-lactic acid) (PLLA) so...

This work presents the preparation and characterization of compression-moulded montmorillonite and carbon nanofibrepolypropylene foams. The influence of these nanofillers on the foaming behaviour was analyzed in terms of the foaming parameters and final cellular structure and morphology of the foams. Both nanofillers induced the formation of a more isometric-like cellular structure in the foams...