A fluidized bed system combining two circulating fluidized bed reactors is proposed and investigated for chemical looping combustion using metal oxides as oxygen carriers. The global solids loop starts in one of the two reactors (primary reactor) where solids are entrained, separated from the gas in a cyclone and sent to the other reactor (secondary reactor) via a fluidized loop seal. From the ...

Treatment of industrial waste water (e.g. textile waste water, phenol waste water, pharmaceutical etc) faces limitation in conventional treatment procedures. Advanced oxidation processes (AOPs) do not suffer from the limits of conventional treatment processes and consequently degrade toxic pollutants more efficiently. Complexity is faced in eradicating the restrictions of AOPs such as sludge fo...

The catalytic co-pyrolysis of a seaweed biomass, Laminaria japonica, and a typical polymer material, polypropylene, was studied for the first time. A mesoporous material Al-SBA-15 was used as a catalyst. Pyrolysis experiments were conducted using a fixed-bed reactor and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). BET surface area, N2 adsorption-desorption isotherms, and NH3 tempe...

In order to operate a process which uses immobilized enzymes at constant conversion and constant capacity, the refreshment of the enzyme must be continuous. In this paper, two reactor types with continuous refreshment of the biocatalyst are discussed: the stirred tank and the multistage fluidized bed. A method is presented for dimensioning a reactor in such a way that the costs for the conversi...

A repetitive control technique which is based on a time-varying stochastic state space model obtained by cycle-to-cycle linearization of a nonlinear fundamental process model around the operation trajectories in the previous cycle is introduced. The control technique was applied to two repetitive chemical processes: simulated moving bed, a continuous chromatograph separation process, and CATOFI...

This research evaluated the efficiency of combined anaerobic-aerobic processes for the treatment of slaughterhouse wastewater. The anaerobic reactor consists of a 3.95 L Plexiglas column with 60 mm diameter and 140 cm height. The cylindrical particles of polyvinyl chloride with 2 mm diameter and 1250 kg m-3 density packed to 60 cm of column were used as biomass saving material. The d...

Numerous physical modalities have been used in attempts to augment the healing process, including ultrasound, low- energy light therapy, and electrical stimulation (ES). ES has been shown to benefit tissue repair in a variety of wound types, but variations in study designs, administration, and parameters render its application in clinical practice somewhat unconventional. A dres...

The thermal flow reversal reactor (TFRR) and catalytic flow reversal reactor (CFRR) can utilize the ventilation air methane (VAM) from coal mines effectively. The initial cold feed flow mass distribution uniformity in the monolith oxidation bed, the critical part of both reactors, has a great influence on the stability of methane oxidation process and conversation rate. So the emphases are put ...

In  this  research,  biological  removal  of  phenol  and  orthonitrophenol  (2NP)  pollutants  from wastewater  by  continuous  moving  bed  sequencing  batch  reactor  (MSBR)  was  studied.  The experiments were conducted in various operational conditions to find out the optimum level of the significant  parameters.  Best  performance  for  removal  of  Phenols  was  achieved  when  parameter...